Behavior Control
Index

AR Parrot Drone Movement

Thumbnail

How To Add This Control To Your Project

  1. Load the most recent release of EZ-Builder
  2. Press the Project tab from the top menu bar of EZ-Builder
  3. Press Add Control from the button ribbon bar of EZ-Builder
  4. Choose the Third Party Robots category tab
  5. Press the AR Parrot Drone Movement icon to add the control to your project
The AR Drone Movement Panel allows control of an AR Parrot Drone Quadcopter v1 and v2.

When you are using the keyboard mode, the A and Z keys are used for Up and Down. The Arrow keys are used for Forward, Reverse, Rotate Left and Rotate Right

By using the EZ-Builder software, you can enable speech recognition, joystick control, Wii control, web control, camera tracking - track faces, colors, motion and glyphs.

Video Device

As mentioned in the Camera Device Manual, the AR Parrot Drone Movement Panel must be added to the project, configured (select the drone version) and connected to the drone (wifi) for the video to work on the Camera Device. The Camera Device control can be added to your project and the AR Parrot Drone Movement Panel may be selected as a video device. If the AR Parrot Drone video device is selected, it will only work if the AR Parrot Drone Movement Panel is connected to the drone. You must also configure the AR Parrot Drone Version in the configure menu before the movement panel will connect to the drone.



Note: Synthiam is not a manufacturer of this third party hardware device. EZ-Robot is not responsible for the operation of this third party device. For operational questions, it's best to consult the instruction manual for operational instructions.

Video