Auto Position (Gait)

How to use the Auto Position (Gait) robot skill

Create frames and actions to animate the robot servos into pre-defined positions. Use this to have the robot wave, dance, or display interactive gestures.

A gait is the movement pattern of animals' limbs, including robots, during locomotion. This robot skill allows robots to customize servo animations for gait locomotion and interacting with the world. Some robots (i.e., humanoids, hexapods, and more) use servos to move with gaits based on speed, terrain, maneuverability, and energetic efficiency. Robot configurations will use different gaits due to differences in their build. For example, a humanoid robot uses a bipedal walking gait, while a hexapod uses a six-legged crawling gait.

Two Versions

There are two versions of the Auto Position robot skill (Movement Panel and Non-movement panel). The only difference between the two is the inclusion of the movement panel functionality. Read about what a movement panel is and how it works with ARC to learn which version of this robot skill to use.

Auto Position Overview

The Auto Position skill transforms a group of servos into custom positions (Frames) to create gaits. You can combine the frames into actions for your robot's gait or animation. The Auto Position will use algorithms to calculate each servo position's transition between frames automatically. Like many other ARC skills, this is done with magic! That magic is "Inverse Kinematics" or "Motion Planning." Each frame of the auto position consists of "goal point positions" for each servo. When frames are combined into an Action, there are algorithms within ARC that calculate the speed at which each servo moves to obtain the goal point position of the next frame. You can use this skill for hexapods, bipeds, or any other creation you can dream up!

How It Works

Think of a flipbook, drawing a figure on each page, and then flipping through to create an animation. The Auto Position skill is very similar. Start by creating frames for each position of the robot. Let's say we're making it dance, for example. Now, create a new action and add each frame of the dance to that action. When the action is played, the joints (servos) of the robot will move into each frame sequentially in the order you added them. Interested in the science behind motion planning? If so, click here.

Example: Picking up a cup

Assume you have a simple robot arm with two joints (shoulder & elbow) and a gripper. You may wish to pick up a cup and raise it. This entire motion sequence is an Action consisting of a collection of Frames. Let us first define the start and end of the desired Action. As you can imagine, there are many steps between the beginning and end, with the robot holding a cup. The Auto Position makes this very easy to accomplish by splitting the Action into a collection of frames.

Creating Frames

You can begin by defining the Frames required to complete the Action. The Frames are snapshots of how the robot can achieve the task. Notice in this example, the task is split into smaller frames. Frames are defined rather than having to program every servo movement. Later, the frames are added to an Action to be replayed programmatically.

After creating the frames in the Auto Position config menu, you will end up with a list of frames with associated servo positions.

Add Frames To Action

An action is a collection of frames. Each frame in an action will have attributes that define how quickly it will move and any associated scripts. The transition between frames is selected when adding or editing an action. The action "Pick Up Cup" has the associated frames in the example image below.

Step/Delay Settings

Hypothetically, let’s assume a frame moves the robot from this example, the Start frame to the End frame. The Auto Position will perform calculations using the start & end positions to interpret the movement positions. The algorithm will ensure all joint positions simultaneously arrive at their destination position during the transition. This behavior is repeated for the transition of each frame of action.

Example: Steps: 5, Delay 20
Using these Steps and Delay values, the Auto Position will send 15 movement commands to the EZB with a 20ms delay between each command. The Auto Position has been determined to send 15 movement commands because the most significant difference between the servo positions is 75. With a Step increment of 5, that leaves 15 movement commands. All remaining servos with minor position differences will use smaller steps, thus arriving at their destination simultaneously. The Auto Position will use the most significant step for the servo with the most significant position difference.

The shoulder will move five positions per command. The elbow will move 2.3 positions per command. There will be a 20ms delay per command. This ensures the shoulder and elbow joint positions arrive together at the destination frame positions.

Tutorial Creating Hexapod Gait

Here is an example of using the Auto Position to program a walking gait for a 3D-printed large hexapod robot. This demonstrates the movement panels' power using additional skills (camera, speech recognition, joystick) to control the movements.

Main Window

1. Movement Panel
These buttons will allow you to control the directional movement of the entire robot (left, right, forward, reverse, and stop).

2. Action List
This is the list of actions that have been created. Select one and click the execute button to run one of the actions.

3. Execute Button
This button executes the selected action in the action list.

4. Jump To... and Transition To... Buttons
The "Jump To..." button instantly moves the servos into the frame's position selected in the frame list. The "Transition To..." button moves the servos gradually into the position of the frame selected in the frame list. These two buttons move the robot into a specified frame instead of executing an action. An action is a list of frames, so if you wish to move into one frame from the current position, You can use these two buttons—the values. You may also select the Step and Delay values.

5. Frame List
This is the list of frames created so that you may access them individually rather than as an action. Select one and click the "Jump To..." or "Transition To..." Buttons.

6. Step and Delay Values
Adjust these values by clicking and holding the left mouse button or right-clicking them and entering a value from the keyboard. These values are used for the "Transition To..." button of the selected frame—the lower the delay value, the faster the servos transition into the position. The lower the step value, the more steps a servo will take when transitioning to the next position. The higher the step value, the more multiple positions the servo will skip to the desired position.

7. Panic Button
This button will stop the auto position and release all the servos.

8. Status Display
Displays the status of the commands being executed inside the Auto Position skill.

Configuration - Frames

Each frame displays values for all the servo positions (in degrees). You can modify the servo positions, and the robot will respond in real-time. There are two ways to edit servo positions:

1) Left-click and hold on to the degree number value to drag the value up and down.

2) Right-click on the degree number value and the keyboard to type in the value.

*Notes:

• In a frame, the position of a servo is between 1 and 180 degrees.


• If the 0 (zero) position value is selected, this releases the servo from its holding position. If the gearing allows, the output gear can be moved by hand. Selecting the value of 0 for a Continuous Rotation Servo will cause the servo to stop rotating.


• If the servo position value of -1 is selected, the Auto Position skill skips the servo for that frame. The position of that servo is maintained, and nothing is changed until the next frame.


• While designing custom frames for your robot, pay attention to the stress/weight applied to servos. The robot may prematurely damage a servo if too much force is applied during the frame creation. We suggest supporting the robot's weight while moving the servo positions of a frame. Once it looks right, place the robot down to see how it is holding.

1. Servo Positions
These are the servo positions set up inside a frame. Each number corresponds to a servo position value set up on a specific port. Enable Port Edit mode to see the port number.

2. Background Image
A background image can be added to represent your robot. Image files (.PNG and . JPG) are supported and will be stretched to fit the background area. The background area is approximately 840 x 512 pixels.

3. Port Edit Mode Checkbox
This checkbox displays the port number above each servo position value when enabled. It also allows the port to be changed by left-clicking on it.

4. Realtime Update Checkbox
When enabled, this checkbox allows the servo positions to affect the robot in real-time. This is very helpful when creating a gait for your robot. You may wish to uncheck this option if you do not wish the servos to move due to correcting incorrect values that may damage the robot.

5. New Frame Button
If you'd like to duplicate a frame, select the frame you'd like to duplicate and press the New Frame button. This allows you to easily continue working on a robot action from the last frame position the robot was in.

6. Frame List
This is the List of created frames containing servo positions. When editing servo positions for a frame, you can right-click on a frame to select the servo positions and copy them to the clipboard. This is useful if you want to create a script for moving the servos later or to make a script for setting servo Max and Min limits. Right-click on a frame and select Copy Positions to Clipboard. Then, paste the clipboard into a script and add the commands to move the servos into position.



7. Transition To... Button
This button gradually moves the servos into the frame selected in the frame list for testing. When creating/editing frames, you can use this button to transition into the frame to test how it would perform when added to an action. The values of Delay and Step will be used for this option.

8. Delay and Step Values
Adjust these values by clicking and holding the left mouse button or right-clicking them and entering a value from the keyboard. When testing transitions to frames, these values are used for the "Transition To..." button. The higher the step value, the more multiples of degrees the servo will skip to the desired position. The higher the delay value, the slower it will take to arrive at the goal positions. These values are not stored or saved with a frame; they are for testing transitions while creating/editing frames.

9. Servo Management Buttons
These buttons allow you to add, delete, fine-tune, and release all servos. First, enable the Port Edit mode checkbox to delete a servo, click on the Servo border, and press the DEL key on the keyboard. To fine-tune the servo positions, press the button and use the options available (Add, Subtract, Multiply, Divide, Set to, and invert) to change the position values.



10. Clear/Change Image Button
This button lets you delete/set your background image for this skill. A background image will help you set up servo positions to match the physical layout of your robot.

Configuration - Actions

1. Action List
This is a list of created actions. Use the action management buttons to make changes to this list. An action consists of a collection of frames, each with parameters that affect how it transitions between frames.

2. Action Management Buttons
These buttons manage the action list. Add a new action, rename an action, or remove an action with these buttons. You must select the action in the list first to rename or remove that action.

3. Frame List
Select the frame you would like to add to the sequence list. Once selected, you will need to press the Add button.

4. Delay, Steps, and Speed Values
These adjustable values will set the Delay, Steps, and Speed of the frame you will add to the sequence list. These values will transition between each frame in the action list.

5. Add Button
This button adds the selected frame from the frame list and associated Delay, Steps, Speed, Velocity, and Acceleration values and appends it to the Action sequence list. The associated delay/step/speed values determine how this frame will be transitioned from the previous frame when the action is executed. Different servo models and manufacturers will support acceleration, speed, and velocity options. These options will use those parameters if the selected servos support them. Check with the servo model & manufacturer datasheet to see if your servos support these options.

6. This Action Repeats Checkbox
This checkbox will make the sequence list loop infinitely when executing the action. The action will continually loop until another action is executed.

7. Edit Script Button
This button allows you to add a script to the action. If the button is green, no script is present. If it's blue, a script will be run when the action is executed.

8. Sequence List
This list contains the sequence frames (frames + values) that will be run sequentially (top-down) when an action is executed. The list can be modified using the sequence management buttons.

9. Sequence Management Buttons
These buttons manage the sequence list. You can test the action sequence with the execute button. Edit any sequence frame with the edit button. Delete a sequence frame with the remove button. Change the action sequence by moving a sequence frame up or down with the move buttons.

Configuration - Settings

1. Auto Position Start Script
This script will be run before a frame or action is executed.

2. Auto Position End Script
This script will be run after all the frames or actions in the queue have been executed.

3. Auto Position Variables
These variables contain the name of the current action and frame and the status of the auto position skill. If the auto position skill executes a frame or action, the $AutoPositionStatus will be true (1). Otherwise, if the skill isn't running, it will be false (0).

4. Title Field
This field contains the title of the auto position skill. You can change it if you'd like. *Note: Changing the title here will also change the title in the controlCommand() associated with this skill. Any existing references in your code must be updated for the new name.

Configuration - Import/Export Utilities

Within the Configuration menu is the ability to Import or Export Actions and Frames to exchange between other auto-position robot skill instances or projects. The import/export is also helpful if you wish to move configuration from the auto position movement panel to the non-movement panel version or vice versa. For obvious reasons, you can only import frames if the servo configuration matches the existing project. If the servo configuration does not match, the import utility cannot simply "guess" what servos to assign the new frames. This limits importing and exporting to projects with the same servo configuration.

A message will be displayed if a frame is imported and already exists. Unselect the frame from being imported. The most common mistake is to import the PAUSE frame, which is auto-generated and cannot be removed.

1. Export Button
This button exports a .autoposition file to add to another ARC project or auto-position robot skill.

2. Import Button
This button allows you to import both .autoposition and .ezb files into an existing auto-position robot skill.

Auto Position With Movement Panel vs Without

There are two types of auto position skills in ARC. One which has a movement panel, and one without.

1) The Auto Position With Movement Panel skill contains a movement panel, which will execute the robot gait actions for direction movement. Like all movement panels, there can only be one instance of this skill. There are predefined actions for movement directions (forward, reverse, left, right, and stop) to which you can assign frames. You can add gait frames to each action to have your robot move in a customized fashion when any control calls the robot to move in a direction.

To control an Auto Position with Movement from a script, specific commands require ControlCommand(). View the cheat sheet for available ControlCommands, or use the script movement commands (Forward(), Left(), Right(), Stop(), Reverse()).

2) The Auto Position Without Movement Panel skill can have multiple instances and does not control directional movements like a movement panel. This skill also accepts script controlcommand()s.

How to Use Auto Position Skill

1) Add the Auto Position Skill to your ARC project (Project -> Add Skill -> Movement Panels -> Auto Position Movement Panel).

2) create frames for your servo motor(s) in the Configuration menu. Each frame is a servo pose in a collection pose to achieve a result.

3) In the Configuration menu, create a new action and add the frames you've created. Add some pause frames between your frames if needed. Adjust each frame's delay/steps/speed values to achieve the desired transition results between frames.

4) Select an action and press the action button in the main window.

Code Samples

Every Auto Position ControlCommand() is published in the Cheat Sheet tab. Pressing the Cheat Sheet tab will display the ControlCommands() for all skills, including the Auto Position. To execute an Auto Position from a script, you would use commands such as:

ControlCommand("Auto Position", AutoPositionAction, "My Action 1")
ControlCommand("Auto Position", AutoPositionFrame, "My Frame 1")
ControlCommand("Auto Position", AutoPositionFrame, "My Frame 1", 50, 3)


Videos

Resources

There are utilities for importing and exporting auto-position files in the Configuration menu. The Import/Export tab will contain buttons to launch the specific utilities.