Arduino Mega

Arduino Mega

Connection Type
USB
Number of servos
48
Audio Support
No
Camera Support
No

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

The Mega can be programmed with the EZ-B firmware for a variety of capabilities when connected to EZ-Builder. The tutorial to program the firmware on this device can be found HERE. This hardware was added to EZ-Builder in this beta release.

Download Firmware Sourcecode

Related Content

tutorial
Create Auto Position Actions From EZ-Script

Create Auto Position Actions From EZ-Script

This tutorial uses the ControlCommand() EZ-Script command that instructs the Auto Position control to create a frame and...
live hack
DJ's 4Th Hack Event (Arduino, Bioloid, Lewansoul, And More)

DJ's 4Th Hack Event (Arduino, Bioloid, Lewansoul, And More)

In the last event, some people asked me to demonstrate how to use the LewanSoul Serial Servos. Also, we'll program the...
tutorial
Connecting Arduino To EZ-Builder

Connecting Arduino To EZ-Builder

Program an Arduino and connect it to EZ-Builder to become an EZ-B.
live hack
Dj's 5Th Live Hack Session

Dj's 5Th Live Hack Session

In this 5th live robot hacking event, I will demonstrate how to program an Arduino and connect it to EZ-Builder via USB...
live hack
DJ's 6Th Live Hack Event (Raspberry Pi & Neopixel With Arduino)

DJ's 6Th Live Hack Event (Raspberry Pi & Neopixel With...

In this 6th installment of DJ's Live Hack Events, we'll be installing EZ-Builder on a Raspberry Pi, install plugins and...
live hack
DJ's 7Th Live Hack (Neopixel, Arduino, Raspberry Pi Ezbpi Server)

DJ's 7Th Live Hack (Neopixel, Arduino, Raspberry Pi Ezbpi...

Today's live hack, we'll play with the Arduino and see if we can get it to control NeoPixels by using the existing...
live hack
PWM Servo Position Feedback

PWM Servo Position Feedback

I'll be hacking a PWM Servo to have positional feedback for EZ-Builder using an EZ-B v4. You can also perform the same...
question

12C Communication B\W Arduino And Ez-B V4 Wifi Controller

ez-b v4 hasĀ  3 i2c connectors so can I connect scl and sda pin of Arduino to i2c connectors of ez-b v4 controller to establish communication b/w...
question
Unable To Locate The Vr Client App.This Is Installed With The Plugin

Unable To Locate The Vr Client App.This Is Installed With...

when i click on start vr client then dialogue appears unable to locate the vr client app.this is installed with the...
question
Using Arduino Mega As A Isolation Device

Using Arduino Mega As A Isolation Device

Looking for an inexpensive way to isolate the EZBv4 signal line from the Hitech 805bb servos on my inMoov. I am think of...