BETA
+More
Behavior Control
Help Index

Soundboard (PC)

How To Add This Control To Your Project

  1. Load the most recent release of EZ-Builder
  2. Press the Project tab from the top menu bar of EZ-Builder
  3. Press Add Control from the button ribbon bar of EZ-Builder
  4. Choose the Audio category tab
  5. Press the Soundboard (PC) icon to add the control to your project
The Sound Board will play WAV files out of the selected default output sound device on your PC. Load WAV files into their desired slots, and use the Play button to trigger them.

If you use a Wireless USB Hub with a cheap $1.99 eBay sound card, this is a great solution for adding digital sound effects to your project.

Related Tutorials

tutorial
Soundboard PC & Soundbard EZ-B tutorial.
Soundboard PC & Soundbard EZ-B tutorial.
This tutorial will guide you through how to set up and use the "Soundboard" controls to give your robot the ability to have sound effects...
Comments 0
Steve G | October 16 2015
tutorial
The Robot Program Episode 009: Getting Six to Move
The Robot Program Episode 009: Getting Six to Move
This lesson will demonstrate how to connect to and move the Revolution Six robot. Follow along with The Robot Program Episode 009: Getting...
Comments 0
Professor E | May 29 2018
tutorial
The Robot Program Episode 006: Introducing EZ-Builder
The Robot Program Episode 006: Introducing EZ-Builder
This lesson introduces the EZ-Builder Robot Software by exploring options and describing features. At the end of this lesson, the reader...
Comments 0
Professor E | June 1 2018
tutorial
The Robot Program Episode 003: Getting JD to Move
The Robot Program Episode 003: Getting JD to Move
This lesson will demonstrate how to connect to and move the Revolution JD robot. Follow along with The Robot Program Episode 003: Getting JD...
Comments 0
Professor E | June 12 2018
Login to post a comment