Thumbnail

EZ-B V4 Info

How to add the EZ-B V4 Info robot skill

  1. Load the most recent release of ARC (Get ARC).
  2. Press the Project tab from the top menu bar in ARC.
  3. Press Add Robot Skill from the button ribbon bar in ARC.
  4. Choose the General category tab.
  5. Press the EZ-B V4 Info icon to add the robot skill to your project.

Don't have a robot yet?

Follow the Getting Started Guide to build a robot and use the EZ-B V4 Info robot skill.

How to use the EZ-B V4 Info robot skill

The EZ-B v4 has an internal temperature sensor and voltage monitor. This control will display both of the values from the EZ-B v4.

The battery monitor is built into the EZ-B v4. The settings for the LiPo battery protection can be configured in the Connection Control Settings.

Similar Skills

Debug

Debug

By Synthiam
Benchmark

Benchmark

By Synthiam
For debugging your EZ-B. This will demonstrate the speed of...
Diagnostic Report

Diagnostic Report

By Synthiam
If you’re having trouble connecting to an ezb or robot and...

Related Questions

question
How 2 Ask A Question, Answer Above Questions,When You Are Told Question Is2 Long

How 2 Ask A Question, Answer Above Questions,When You Are...

How can I ask a question and answer things like yes connected to wifi and blue light flashing etc when I continually get...
question

Custom Hexapod Build

Can I use the EZ-B v4 and the ARC to make my own custom Hexapod with leg lengths that differ from the EZ-Robot six hexapod kit ?. Will the ARC be able...
question
Need Some Help /Wire Diagram To Go By

Need Some Help /Wire Diagram To Go By

I have taken a couple of years off of this omnibot 2000 build. I kind of get stuck, frustrated and quit. Then every no...
question

EZB-V4 Battery / A/C Adapter Usage

Hello everyone,  Have a power question and any advice with this is appreciated. I’ve searched the forums but haven’t quite found a thread that answers...
question

EZ-B V4 No Longer Connecting, Shows Firmware 0000000

Please see below the logs when trying to connect from connection diagnostics How do I fix this? It was working perfectly until today EZB 0: EZB 1: EZB...
question
Using Arduino Mega As A Isolation Device

Using Arduino Mega As A Isolation Device

Looking for an inexpensive way to isolate the EZBv4 signal line from the Hitech 805bb servos on my inMoov. I am think of...

ARC Pro

Upgrade to ARC Pro

ARC Pro is your passport to a world of endless possibilities in robot programming, waiting for you to explore.

Login to post a comment