PWM Slider

+ How To Add This Control To Your Project (Click to Expand)
  1. Load the most recent release of ARC.
  2. Press the Project tab from the top menu bar in ARC.
  3. Press Add Control from the button ribbon bar in ARC.
  4. Choose the PWM category tab.
  5. Press the PWM Slider icon to add the control to your project.
The EZ-B can trigger a digital port ON and OFF rapidly to simulate a voltage range between 0 and 5volts. This method is called Pulse Width Modulation. The slider controls the value of the PWM on any digital I/O pin of the EZ-B.

If you have a motor controller (HBridge) with an Enable port, you can connect it to a Digital I/O connector and use this to control the speed of the motor. Or, you can control the brightness of an LED.