Comm Expansion Configuration
— Configure EZ-B v4/2 Comm Expansion: switch between UART transparent proxy and USB direct PC link (avoids WiFi); EZ-B needs separate power.
Try it →
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
Other projects from the same builder.
Robots the community built with Synthiam ARC. Get ideas for your next build.
@robotmaker. Mine moves up and down and in and out. Notice how the arm is above his head? For my design and vision this works best. Can you post a few pictures of your design in your thread so we can see what you mean?
yes i know like my design can do tooo
Ah yes I understand now.
so very busy at home,but hope to have my design up soon,making my own metal brackets and servo mounts,plus stating on the hand design first,have 2 plans for it ,one using the claw and add servo's second i have a robotic 5 finger hand i might replace the claw with
Well hurry up I want to see some pictures of your designs / progress.
just show us your old pics. You got to have a few to show after years of building.
need to take some,few at my house and few in storage ,getting ready to move to a much bigger house here is a few i made i found on my computer,not much in to taking photos of my robots but
this one has changed a lot since the photo vex robot with update hand and claw ,web cam instead of the cheap vex camera and mini itx board added ,plus added frame will look for a update photo
this one is complete too ,with 2 camera's instead of one like in photo ,has many sensors
SEEKER 3 with mini laptop
this johnny five design i got from lynxmotion and upgrading alot with HSR-5995 SERVO,S and MINI itx BOARD and much more like webcam,right now its partly apart to change the servo's over ,mostly arm lifting
this not my photo only about what it look like except for higher base,and and pan and tilt web cam added@glickclick can you post some of your robot designs