General Topics
With Synthiam ARC Pro, you're not just programming a robot; you're shaping the future of automation, one innovative idea at a time.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Men's High-top Sneakers
Cyborg fashion sense has no limits! These extremely comfortable high-top canvas sneakers are made to last and to impress...
Recent Robot Skills
Wavefront
Wavefront grid planner computes collision-free, deterministic paths from start to goal using known occupancy...
NMS Faux Odometry
Estimate pose odometry from movement distance for robots without encoders, calibrated by speed. Suited for DIY...
The Navigator
Path-planning navigator using ARC NMS position and obstacle data to map, log trajectories, and autonomously...
Featured
Control Kondo KRS ICS2/3.5 servos via EZ-B UART; experimental, untested. Supports chaining, virtual servo ports, Release() and Servo() commands.
Featured
Unboxing Folger FT-6 large-format 3D printer kit with 3-camera views; full build livestream planned to print larger, more accurate robot chassis.
general
Identifying EZ-Bv4 And Iotiny Seller
Hi Roboteers, I am looking for information regarding a seller on eBay who is offering an EZ-B v4 and IoTiny. The listing is titled "EZ-Robot EZ-B v4 WiFi Robot Controller - Used, Tested - STEM Robotics AI DIY." The seller's username is "mayaway," and they have a seller rating of 550 with 100% positive feedback. If anyone has...
2
51
Nomad 6R |
general
Introducing The Rolliclip Component
Hi, everyone! I have created a component called "rolliclip" that allows you to adjust the robot arm forward by 1.5 holes. Here’s an image of...
6
334
Nomad 6R |
general
Future Improvement: Floor Map Skill
Hello Athena, Regarding the Floor Map skill, I understand that its current functionality is to visualize the path as the robot moves, and it is not designed for navigation purposes at this stage. I was wondering if there might be a possibility of expanding this feature in the future. Specifically, it would be beneficial if the Floor Map skill could...
4
79
Athena |
general
We Are Getting Ready To Release Our Next Generation Open Source Robot The XR-2
The XR-2 robot platform, available at Robots Builder, is...
59
2 k
jp15sil24 |
general
Inmoov Head Design Modifications
Hello InMoov Builders, I've encountered some design issues with the EZ-Robot InMoov head that I’d like to discuss and share my solutions for. Firstly, I...
31
668
Athena |
general
Help Identifying HDD Rover Components
Hello, Roboteers, I recently found a complete HDD Rover Rolli listed for $130 on eBay. However, I am unfamiliar with some of the parts included in...
2
94
Nomad 6R |
general
The Birth Of The XR-1 DIY Robot
Introducing the Updated XJ-5: A New Class of Hobby Robots The XJ-5 robot platform, available at Robots Builder, is known for its user-friendly design,...
53
5 k
RoboHappy |
general
Resolving HTTP 417 Error In ARC
I am experiencing an issue this morning with the following error message in Synthiam ARC: Version: 2025.06.22.00 System.Net.WebException: The request failed with HTTP status 417: Expectation Failed. at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean...
3
116
Athena |
general
Exploring Microphone Arrays In Robotics
I've been exploring the use of microphone arrays in robotics, and this video provides some insightful information on the topic. Like many...
0
105
general
Resuming Marmalade Robot Development
Hi Friends, Over three and a half years ago, I began developing a companion dog-type robot, which I have been codenaming "Marmalade."...
2
139
DJ Sures |
general
STL File Request For Jaw
Is there an STL file available for the lower jaw without any support structures?
32
585
Nomad 6R |
general
My First 3D-Printed Robot
Here's my first 3D-printed robot! I used the EZ-Robot InMoov Head Kit and tested it with the sample projects available in Synthiam ARC. I'm still exploring...
8
203
Nomad 6R |