Profile Picture

Bookmaker

Country: USA
Member Since:

Achievements

  • 2011-08-13 - Joined Synthiam
  • 2011-08-17 - Created First New Discussion
  • 2011-11-21 - Joined First Discussion
  • 2012-11-29 - Posted First Project Showcase

Latest submissions

No behavior controls for ez-builder have been shared yet.
question
Problem With Speech Recognition
Problem With Speech Recognition
Hello to all, When I load my program with my speech recogition controll and it's commads saved from the previous save, the control does not...
question
Robot Band
http://www.wimp.com/robotband/ These are great bots.
question
Gripper
gripper
question
Transformer
Great transformer One of the best I have seen.
question
Obstical Course
http://www.dump.com/robotmaneuver/ This thing needs an EZ-B
question
Ball Bot
amazing
question
49 Quadrocopters In Formation
Someone has way to much money and time! http://www.dump.com/quadrocoptersformation/
question
Paper Robot
Paper Robot
Paper Robot This is really cool.
question
Running Robot
29 MPH
question
Soccer
http://www.dump.com/botsplaying/
question
Rock Paper Sicissors Robot Never Looses
http://www.wimp.com/winrate/
question
Sensordrone
Sensordrone
Sensordrone
question
Raspberry Pi
Well, it looks like it is finally available. They say around $35.00, very exciting. Raspberry Pi
question
Camera
Camera
Well, my camera went dead on me. I am sure there is no warenty since I took it out of the case and probably not even if I haden't. Any one...
question
Transformer
amazing
question
Fri Night Chat
Fri Night Chat
We have started. Join in!
question
2.5 Amp Motor Controller
Anybody got an extra 2.5 Amp Motor Controller they want to sell. The store is closed this week and I burned mine up.
question
Friday At 6:00
Where is everyone. Come on, let's chat!!
question
Servo Speed
Some of my servos work with the servospeed command and some don't. When I run this script Only servo d17 runs slow. Both of the other two run at full speed. The servos are the same brand. I thought it was part of the bug but it is still doing it.
question
All Touraine
http://www.wimp.com/roughterrain/
question
Jumping Robot
Jumping Robot
question
Joystick
Hello, I have a Rapoo joystick and it has been working just fine but last week it started acting weird. The way it is supposed to work is when you first turn it on it has two lights that flash for a moment and then when it connects it turns on just one light. Last week it started to go back to both light flashing when I was controlling my robot and...
question
Wireless Hub
I purchased an IOGEAR wireless hub and it came with an AC adapter outputing +5 volts at 3.0A to power the wireless unit. Can I hook it up directly to the EZ-B?
question
Wave Glider
wave robot
question
See Me.
Came across this and thought it might be of interest. See me in the mirror for the first time.
question
Servospeed
Servospeed
Hello, When I take a servo and test the speed control by it's self it works just fine however when I put it into a script with other servos...
question
Cheetah Robot
18 miles per hour
question
Over Heating
Over Heating
DJ, I have managed to hook up alot of servos and I find that the voltage regulator overheats and the servos will no longer hold their...
question
Quadracopters Perform James Bond
James Bond theme
question
Hall Effect Sensor
Hall Effect Sensor
Hello, Does anyone know how to use a hall effect sensor with the EZ-B? I had planned to use one to locate a position for a modified servo...
question
Camera Control
I loaded the latest version of EZ-Builder and now the program runs slow. If I put the camera on pause everything is as usual however with the camera on, it takes between 2 and 4 seconds for the program to respond to any mouse click. I tried deleting the control and puting in a new one. No help.
question
H Bridge
Hello to all and Happy New Year. I am having an issue. When I turn on my H Bridge it not only runs the motor it is supposed to but it also runs a modified servo that is not connected. If I change ports for the H Bridge control it changes the modified servo that it also controls (sometimes). Is there a solution such as a draw down resister on the...
question
Fan
DJ, Do you have the little 5V fans for sale yet? If not will you soon?
question
Frustration
Frustration
Well I am 98% done with Buster's left arm and my 5V voltage regulator on my EZ-B gave up. I had a fan on it but I guess I just hooked up way...
question
Camera Problem
Camera Problem
Hello DJ, I installed the latest version of EZ-Builder and I am having a problem with my camera control. If I start a new file it works just...
question
Mouse Wheel Control
DJ, You know how you can click on an area on the screen and you then can scroll up or down with your mouse. This works on all the controlls in EZ-Builder however if you click on the background it does not work. It would be really slick if it did with the size I am working with. Right now it takes up about two screens worth and I have to use the...
question
Another Robot
ball robot
question
Ez Cloud
DJ, I uploaded my latest file to the cloud with success however when I went back I could not retreive it. I tried deleted it and resaved it to no avail. I even tried it from work. I have fresh installations of the latest EZ Builder on both computers.
question
2.4Ghz Mini Wireless Camera
Hello, Does any one know the brand name of the camera pictured in the tutorial? I have been looking to buy a USB wireless camera and I can't find anythng on line at all. I thought I could go direct to the manufacturer if I knew the brand name. Nothing on Ebay for weeks now. Anyone know where I can buy one?
question
Spark
Here is one for youall. I have a spark generator (multivibrator atached to a coil) on board my bot. When I turn it on it causes my modified servo, located near by, to go on. Is there a way to cure this? I will let youall in on what I am using it for once I get it all working properly.
question
Release Notes
I don't see any release notes for 2021.01.15.00. Am I missing something?
question
Motor Stall
I am running a gear motor on my robot's sholder. It is 6 to 24 volts (I am running about 11 to 12 volts) and draws 90 to 150 mA. I accidentally ran it past a stop and stripped the gears when it stalled. Can I prevent this from happening again with a fuse? If so what amperage should the fuse be?
question
LCD Display
DJ, I am out of Digital Ports and I want to use a LCD Display. Can I use a 12C port and if so do I need to purchase a special interface and how would I input the text since the only control available under 12C is blinkin and nothing that I can see in Script? I await your input.
question
Problem With If
Problem With If
I was trying to script with an "if" command and in the script functions it says if (adc[port])[condiction][value]) in the sample it says...
question
Modified Servo
Modified servo has no board number option
question
Buster's Progress
Buster's Progress
Thought you all may like to see Buster's progress.
question
Finger Pad
Hello DJ, When you click on the ? for servo - finger pad, you get info for servo-sound. Love all the new controls. Will servo speed be working any time soon?
question
Turning My Camera On And Off
Turning My Camera On And Off
Hello, I bought a camera on line and the inside looks like the Konig that JD has in Wall-e. However I think the on off switch may be...
question
Spelling
I could have swarn that the forum had spell check at one time. Am I missing something? Yes, spell chack. (lol)
question
Picture
Picture
Hello, DJ asked me for a picture of my fan to cool the voltage regulators so I took one. Then I went to place it and found out the Forum...
question
You Are Not Going To Beleive This.
I can't ever get the Add YouTube Video to work. Here is a link. http://www.wimp.com/teachrobot/
question
Speech Recognition
Hello, I just got my new computer and I am finally running Windows 7. To my dismay I spent the entire day and I can't get speech recognition to work. I have read all the turorials and searched and read everything on the forum to no avail. Language, default, Windows SR off, tried everything. Any further suggestions would be greatly appreciated.
question
Running 2 Ez-B's
I received my second EZ-B today (5 day delivery) and it took all of one minute to get it up and running. GREAT job DJ!! Works great. Now I can fill up another 20 ports.
question
Speech
Hello, Can the EX-B directly drive a Parallax EMIC speech board?
question
EZ-Builder
Hello, Did I hear you correctly that EZ-Builder will support more than one EZ-B at a time now? If so I need another one. The last one took a month to get to me. Do you have expedited shipping?
question
Sound Servo
Okay, how does this new feature work?
question
MCLR
What is the MCLR port for?
question
Spell Check
DJ, Why doesn't spelll check work anymore?
question
Welcome Back
Welcome Back DJ, We have all missed you more than you will ever know. So many questions. I see you were busy last night and only gave up after answering a bunch of recent forum questions. I will go easy on you and only ask one at a time starting with: http://www.ez-robot.com/Community/Forum/posts.aspx?threadId=183 I know alot of us are having the...
question
Joystick
Hello, When programing the joystick the first column says Btn Down Cmd and this works great. The second column says Btn Up Cmd. I can't seem to get this to work. Any help would be appreciated.
question
Data Ports
Hello to all, Well, I am out of data ports. Yes, I have used all 20 and need more. Is there a way to run two EZ-B's in conjunction? I don't think so. DJ, would you build me a duo? Is it feasable? I read on the forum where someone added a whole bunch of additional inputs but that is like running two servos off of one port and that will not work. Any...
question
White LED On The EZ-B Board
I got my EZ-B yesterday and it seems to be working fine expept the white LED does not work. I thought I read something about it on the forum but I can't seem to find it. Any input would be appreciated.
question
Hbridge
Hello to all, I am powering my drive motors with an HBridge and it works great except when I first turn on the EZ-B, before it sees the Bluetooth, the HBridge sends power to the motors. Does anyone know how to avoid this? Also, my joy stick is backwards. Anyone know how to reverse it? Best regards,
question
Speaker Power
Okay, so I bought the USB sound card and it works great with head phones but I want to run it to the speaker in my Robot. I guess I need a LITTLE amp. Anyone have a simple answer?
question
Buster
Has anyone hacked Buster http://www.ebay.com/itm/toy-robot-buster-/140595523366?pt=LH_DefaultDomain_0&hash=item20bc256f26 I took out all the screws and he will not come apart. There must be a way but I sure can't find it. Any help would be greatly apreciated.
question
Wireless Hub
Hello to all. I ordered the iogear wireless hub and found out it does not support cameras. I returned it. There is one that works with XP only, Belkin High Speed Wireless USB Hub F5U301. I don't know what works with the other operating systems. Regards from the Bookmaker.
No live robot hacking sessions have been shared yet.
No user tutorials have been created yet.
No apps have been created yet.
No firmwares have been created yet.
No 3D Parts have been created yet through EZ-Builder.