This is a simple project that hopefully I wont over complicate. Since he Squeegee needs to get as close to furniture and the toilet and bathtub as possible this my be a challenge. After all we spend most our time trying to get our robots to avoid the objects in the room. Im giving new life to a radioshack robie jr rc controlled robot.
More robots by jstarne1
Other projects from the same builder.
Jstarne1's Sky Anchor ,Gig Wifi Drone
Hex coaxial drone with 12 props and 15 lb thrust, 3D-printed frame to lift a WiFi antenna and camera for extended robot...
Jstarne1's Air Tunnel Plus Bot The Smartest Way To Kills...
UV air sterilizer and mobile disinfecting robot with RGB, pest trap, scent control, timed ozone/ionize, motorized UVC...
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
Mickey666maus's Cycloidal Reducer 40:1
Work-in-progress cycloidal gearbox 40:1 driven by Tarot 4108 brushless motor, theoretically offering near-zero...
Steve's Elvia The Ez Robot Powered Android-Elvis Hack
Convert a WooWee Elvis into an EZ Robot reusing original parts and EZ Robot servo control boards to drive DC motors,...
Cliffordkoperski's F.K.Q. Robot
21 DOF humanoid with 19 servos, 7.4V 2000mAh (1h) runtime, budget brackets/servos, EZ-B v4 and camera for NAO-like...


Ok first we need to see what we are working with..... I took the robot apart and removed most electronics and ran it through the dish washer. Now the robot looks very clean. I would like every ones opinion if I should use the dome or not.
I have a small problem , one wheel has damage to the rubber. I am going to consider using continuous rotation servos and the tires with them. Well see if I can work my magic and make these wheels work. Somthing very important is that the drive train is quiet as this is really not a entertainment robot.
Now that the robot is generally clean we can take a look at how much room I have to work with. A huge section of the robot is dedicated to 8 AA batteries from the original manufacturer. We will see but that could be a possible mountingamounting area for a big lipo battery.
We see if you dont count the AA battery box there is 7 inches high of space and 4 inches to the collar from the factory pcb.
Test fitting ezb ? Sure why not
Looks like ezb fits right at home dead center of the robot. I may use a different position if I eliminate this AA battery box that is taking up soooo much room. I took a look at possible ez cam mounting positions as well.
I like the dome Josh. And it goes along with his bigger brothers.
Cool pics and nice job ! Congratz ! Now some vids ?
Greetz, PhG
Probably no vids till something can move. I dont believe I will do any kind of pan or tilt on this robot but we will see.