Initial test of my InMoov robot running on the new EZBv4. I have 24 servos connected to one v4 and all are running OK.
Thanks for everyone's help to get it up and running.
By bhouston
— Last update
Discover more robots
Hoolagen1's Update To My Wall-E
SparkFun MP3 Trigger installation photos and new body tilt plus forward/back and left/right motion controls
Steve's Navigation Test Robot With Intel Realsense T265
Navigate an iRobot Create using Intel RealSense T265 and EZB with Synthiam ARC for reliable visual tracking navigation...
Ianmbrick's Project To Link A Microsoft Kinect Xbox 360...
Control EZ-Robot Revolution JD with Kinect Xbox 360 using Synthiam ARC, Processing and EZ-Script to mirror body joint...
Those modified HS-805BB are great motors for the arms and shoulders... @bhouston... Can your inmoov grasp and lift say a 500ml bottle of water?
On the inmoov site... the owner states that any printer with a print area of 12cm x12cmx12cm will work...
You can control those HS-805BBs without the external pots, but it is not going to give you precise control over the movements... Adding pots to the joints will provide feedback to the ezb as to the position of the particular joint... This is kind of important because without feedback you can easily over extend the joint stripping the gears or breaking the joint itself....
@bhouston. the part under the stomach. The v shape. is that what you made out of plywood for the stand.
@merne, correct.
@ Richard R, I have not picked up a bottle of water but I have seen other InMoov's do that and pour the water into a glass.
@bhouston... Thanks and great work... I have decided to take a stab at this... Just have to wait a week or two to get my printer....