Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Compact Lynxmotion Smart Servos with position feedback, safety features and UART TX/RX for Arduino/EZ-B v4; scriptable temp, load, load-dir and ping.
Featured
Positioning system for ez-robots after years of work and many trials, now heading to manufacturing for scheduled summer releases
question
Whits Fingers In Englich
whats the name off these four fingers. i have thumb/FINGER?/ringfinger/pinky i use four fingers cause hand robosapien has only four.
11
4 k
Dunning-Kruger |
question
Is This Correct
am building a hand.will this scipt slow the fingers down at start up.
4
3 k
Nomad 6R |
question
Ezb Camera Window Partly Not Displayed
I just added EZB camera and its control window to my robot and made some tests. The definition was 320x640 and it was not possible to modify it...
5
2 k
DJ Sures |
question
Script Flow Error
I have the MQTT plugin in my project and get this when adding the Script Flow control Script Flow Error: System.InvalidCastException: Unable to cast object of type 'EZMQTT_Client.FormMain' to type 'EZ_Builder.UCForms.FormMaster'. at EZ_Builder.UCForms.FormScriptFlow.hGiQO36CkBg() Anyone see this also Thanks
1
2 k
DJ Sures |
question
Mobile App Continuous Toggle Button
I am working on a mobile app and have a button that I want to be able to toggle. First push would turn leds on and next push would turn leds off. This...
12
3 k
rbonari |
question
Using The Camera To Detect Multiple Objects With A Different Script Execution Fo
Has anyone been able to teach their robot to recognize...
2
2 k
dbickert |
question
Using Plastic 3D Printing For Robot Parts
Plexiglass/Acrylic is my go-to robot chasis-building material, but it is near-impossible to make round objects with plexiglass. I'm...
9
3 k
Mickey666Maus |
question
Thormang 3
I have always liked the track robots because of easy use outside but after watching this youtube robot here, Damn that looks seriously spooky/cool,about double the size of my tracked Rad bot! Rise of...
7
4 k
Nomad 6R |
question
Help Identifying 20 Pin Io
Hey guys I'm trying to see if anyone can identify this 20 pin IO male and female connector. Its super tiny. It connects a camera to a PCB board. I'd like to add a...
5
3 k
fxrtst |
question
New Inmoov Builder Power Questions
For the inmoov builders here. For power distribution I am thinking of using a tiny and EZ/4 plus a SSC-32 spreading the BB805's out over the 3 boards. I have a 60A power supply to feed the boards. I understand the EZ will do 5A each so 2 805s on each EZ and a few small servos and the rest on a SSC-32. Do you think this is a way to go? . Right now 3...
4
2 k
Dunning-Kruger |
question
Uart Connecting To An Arduino
I'm very new to both the ez-b4 and Arduino and need basic help or advice. With my robot I want to be able to control LEDs through an Arduino. I have a Mega and with it I can add more LED functions to it as I learn. I've been reading a lot of posts on this and I took in so much info, I think I'm just dangerous and not knowledgeable. I want to start...
14
5 k
kashyyyk |
question
Mqtt Conecting
i am trying to use the MQTT plugin with no luck. I have a host on 192.168.2.8 and so far am just hitting the connect button but its timing out with...
9
6 k
Greg C |