In an earlier thread Doombot had mentioned he may put a ping sensor on his robotic claw to sense and pick up objects automatically... Well, I had a moment of inspiration so I thought I would try and knock up something... So check it out... a simple prototype of my version of object detecting robotic claw...
By Dunning-Kruger
— Last update
Discover more robots
Jstarne1's Diy Awesome Project Case Made From Netgear...
Build a custom, low-cost project case from used routers for $12 using a Dremel and superglue to house a light, fan and...
Ericez's New Friend For Jd, Lita My Humanoid Robot Made From...
Building a DIY humanoid JD robot with ez developer using PVC pipes and scrap parts while awaiting gearbox replacement on...
Ezang's Mr. Conehead Video For You To Watch In 2019
Mr. ConeHead 2019 video to watch, hope it's not too long
Need to rebuild your youtube video, right now it's marked private
Not sure how that happened... does it work now?
Nice, thanks!
Hey Richard thanks for the vid!
and its kinda "crab-like" with the ping sensor eyes
Thanks for the mention bud! However it's not an original idea of mine. I blame the roomba beerbot for the inspiration! Mine is located underneath the claw though, so it is out of sight....
Thanks guys... I agree the ping is either too big or in the wrong place... Going to tinker more and see if I can't make it a more elegant design...
Nice video. I like the idea of putting an IR sensor in place of the ping sensor also. I also would suggest maybe usiing pressure sensors in the claws to aid in determiningamout of claw pressure on the softer obects.
Pressure switch is a good idea... I am working to integrate this (and more) into my current project.... I will update as I progress... thanks for the comments....