Ok this is the third of a trio of robots made to run around outside with first person view ez robot wireless cameras. Each has airsoft automatic guns and some kind of dart launcher.
More robots by jstarne1
Other projects from the same builder.
Jstarne1's Sky Anchor ,Gig Wifi Drone
Hex coaxial drone with 12 props and 15 lb thrust, 3D-printed frame to lift a WiFi antenna and camera for extended robot...
Jstarne1's Air Tunnel Plus Bot The Smartest Way To Kills...
UV air sterilizer and mobile disinfecting robot with RGB, pest trap, scent control, timed ozone/ionize, motorized UVC...
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
Cardboardhacker's Creeper Project
Minecraft Creeper robot build using Ez-B, motor controller, camera and 12V DC motors - 3'7" body, parts list, costs...
Intellamicrorobotics's Meet @Arti_Robot
aRTi robot built from about 20 lbs of PLA - a work-in-progress learning project exploring AI and robotics.
Mickey666maus's BLDC Control Odrive-For-ARC
Control Tarot 6S 4108 KV:380 BLDC motor like a servo using ODrive and Arduino with Synthiam ARC for closed-loop position...


Airsoft guns and electronic nerf darf launcher came in today! Well 2 of the airsoft guns there are two more coming.
Each robot will have a front and back target panel which will register hits from airsoft and dart fire! Panel s are 4" x 4" and unobstructed by any kind if limbs or shields.

The rad 2.0 arrived today! First thing I know I must mod is cutting out the cup holder. This is so I have room for a larger battery and additional electronicsWoohoo all 4 cyber airsoft electric automatic guns are here! They hold 1500 bbs for each hopper if one robot had 4 guns thats 6000 rounds without a reload
I must check rules on this but if its not allowed I will keep 2 guns as spare parts.
Quad gun . Dual wielding with ten dart launcher in the chest

Dual guns w ten dart launcherThanks to gunner this robot will get the ir filter removed from the ez robot cam whenever I get my shipment of ezb equipment. I have 4 cams on the way. The two lights thst are on the side of rad robots head im going to use for ir illumination with several ir leds in each one.