EwgBPwKcw0cz!~~60_1-634877148220156250.jpg)
EwgBPwKcw0cz!~~60_1-634870572001250000.jpg)
Ok this is the third of a trio of robots made to run around outside with first person view ez robot wireless cameras. Each has airsoft automatic guns and some kind of dart launcher.
By jstarne1
— Last update
Discover more robots
Itsmeintorre's 3D Printed Adventurebot
3D-printed AdventureBot built from 'bare' STL files with Ender3, EZBv4, 360deg servos, custom inner-tube treads; PLA...
Mgodsell1973's Hexxy - My First Walker
Hexapod walker build with 18 servos, hand-cut parts and calf/foot photos, DIY EZ-Robot Revolution progress and assembly...
Ezang's Mr. Conehead Dancing, Take 1 - I Will Try More...
Stabilize hard-to-balance Mr. ConeHead for dancing, preparing for Take 2.
Airsoft guns and electronic nerf darf launcher came in today! Well 2 of the airsoft guns there are two more coming.
Each robot will have a front and back target panel which will register hits from airsoft and dart fire! Panel s are 4" x 4" and unobstructed by any kind if limbs or shields.
The rad 2.0 arrived today! First thing I know I must mod is cutting out the cup holder. This is so I have room for a larger battery and additional electronicsWoohoo all 4 cyber airsoft electric automatic guns are here! They hold 1500 bbs for each hopper if one robot had 4 guns thats 6000 rounds without a reload
I must check rules on this but if its not allowed I will keep 2 guns as spare parts.
Quad gun . Dual wielding with ten dart launcher in the chest
Dual guns w ten dart launcherThanks to gunner this robot will get the ir filter removed from the ez robot cam whenever I get my shipment of ezb equipment. I have 4 cams on the way. The two lights thst are on the side of rad robots head im going to use for ir illumination with several ir leds in each one.