EwgBPwKcw0cz!~~60_1-634877148220156250.jpg)
EwgBPwKcw0cz!~~60_1-634870572001250000.jpg)
Ok this is the third of a trio of robots made to run around outside with first person view ez robot wireless cameras. Each has airsoft automatic guns and some kind of dart launcher.
By jstarne1
— Last update
Other robots from Synthiam community
-634767667799482421.jpg)
Sfoy's My Frankenbot - Robosapien, Hearoid, Ottobot Head
IN progress... I am using a hearoid omni bot base. - The base will house: need some new treads if anyone has any ideas...
Goldenbot's Stickman JD Robot V1.1
Say hi to Stickman JD (In version 1.1 I added an x,y,z axis and a floor grid so you can view the Stickman from...
Animator28's AVA (Advanced Visual Android) Update
Hey guys I finally have my robot head all hooked up. I am using micro dc motors with hbridges and as there is no...
Wow, it is really coming along. And looking good.
My problem at the moment is somthing on this one robot is causing any paint or even sealer to wrinkle bad. Im going to sand all the way down to bare plastic and clean it. :/
Ok I started sanding between late last night and today this is what ive done...
I will need to get the little edges by hand. Electric sanders are a a gift from god I tell you. If you dont have one get one!
hi josh
It sounds like youy've got some silicon contamination on the robot . Maybe the grease from the gearbox . that stuff can get everywhere . It's like a gift that keeps on giving. Just a guess , A good clean with white spirit may help.
Steve_C.
You may be right. Every other robot has not had this problem. I will have it sanded and cleaned soon its just a pain to his a stag like this.
sure is a pain , i had silicon contam in my spray gun once took a week of cleaning to get rid all together.
In your case you may have used a cloth to wipe the robot down that has some grease on it , It only needs a very small spot to create havok with you paint work.
Steve_C.
Hopefully I will have the first coat of paint for the camouflage on it like tommorow or wed