Asked
— Edited
Resolved by Jeremie!
3D Print Jd Head
hi
has anyone printed a jd head?my question is ,how do you print the head on the printbed?
thank you
Related Hardware (view all EZB hardware)
JD Humanoid
by EZ-Robot
JD humanoid robot kit - WiFi-enabled, 16 DOF with metal-gear servos; easy, fun, educational, available from the EZ-Robot online store.
Wi-Fi / USB
Servos
24
Camera
Audio
UART
3
I2C
ADC
8
Digital
24
Related Robot Skill (view all robot skills)
File Manager
by Synthiam
Displays files currently open for reading by scripts, shows only read-opened files, helps diagnose read/write locks and file access errors.
What kind of string do you use for the fingers?
The string used for the finger is fishing line not string 1000 test the reason is not just strength but because the larger diameter causes less wear on the joints. if you use PETG you can use much lighter fishing line as PETG is very resistant to abasing .
thanks again nallycat
So what do you use with PETG?
nallycat
another great tip.i used katoen string for now .
waiting for parts for the inmoov . funny thing happened . i adjusted the servo holster for using the HDD ez robot servo's. all went well untill i saw the head only moves about 2 cm up or down
.
thats when it hit me why the robot builders use the potentio meter .lesson learned .
start doing some test printing . djeez these robot cost alot off money on ebay.
here's the head . the one dj has cost some 300 dollars
bummer .
some more pics .
i notest that my apps are stated private .is that normal proscedure ?
print last two days ,two nights .xD head is turnable .
You're getting pretty good at this Nomad, nice job.