Profile Picture

cem

Country: United Kingdom
Member Since:

Achievements

  • 2014-02-25 - Joined Synthiam
  • 2014-02-25 - Created First New Discussion
  • 2014-03-14 - Joined First Discussion
  • 2014-03-14 - Created First EZ-Cloud App
  • 2014-10-15 - Shared First Photo
  • 2014-12-30 - Connected EZ-Builder to EZ-Cloud
  • 2015-01-30 - Shared First Video
  • 2015-01-30 - Attempt Helping Forum Member
  • 2016-11-02 - Created Custom Avatar
  • 2017-12-19 - Posted First Project Showcase
  • 2018-04-03 - Used Bing Speech Recognition

Latest submissions

No behavior controls for ez-builder have been shared yet.
question
Raspberry Pi 4, Or Lattepanda Enbeded On My Inmoov

Raspberry Pi 4, Or Lattepanda Enbeded On My Inmoov

I want to install a mini PC and 7inch touch screen on my InMoov, and can't decide either buying the new Raspberry Pi 4 or the LattePanda PC....
question

Script Manager’ In Mobile

I have a lot of scripts for my InMoov in Script Manager’ and want to run some of them via mobile. As the Script Manager’ is not implemented in mobile yet! Any suggestions how to run the individual scripts, apart from redoing everyone in individual EZ-Script controls?
question

Supercaps On 3.3V Rail, Preventing Ezb To Connect?

@Jeremie I hate to bring this topic up again, ( its been about a year ) :) Back last year I put two SuperCap rated 1.5f @ 5v in series ( 1.5f 10v ) on EZB's input Servo power ( 6v Battery ) to prevent brownouts and its been very successful, and worked well. ( Stopped brownouts ). But since converting some of InMoov's large scale HS-805BB servo's...
question

Using Ez-Robot Hdd Servos Instead Of Hs-805Bb On My Inmoov

I'm experimenting with HDD Servos on my InMoov, using them in place of the HS-805BB to stop the buzzing under heavy load. I started with the Elbow servo and it seem to handle the weight etc, and no buzzing when holding up the arm, unlike when using the HS-805BB servos! Seems to work well. See quick video https://www.youtube.com/watch?v=bySzD2kxSSM...
question

Iotiny Case

@ Richard The Prototype of the Io Tiny case you did about 9 mths ago, is there any updated stl files, or are the ones in your posting the latest? While I'm waiting for my Io tiny's to arrive, I want to print out the case. ?? Thanks Chris.
question

Using Talk Servo With Pandorabots Plugin

Just been played around with pandorabots Plugin creating basic scripts for my Inmoov ( Data ), and noticed that I can't sync up the speech with Inmoov's mouth correctly, even when adjusting the 'talk servo' parameters settings. The 'talk servo' parameters I've setup in other scripts work fine and are in sync with Inmoov mouth, without going through...
question
Inmoov Head

Inmoov Head

My InMoov Project. Its taken about 3 weeks with breaks in-between and have nearly finish the head, also getting use to 3D Printing! As I...
question
Ez-B V4/2 Comm Upgrade Boards

Ez-B V4/2 Comm Upgrade Boards

My two V4/2 Comm Upgrade boards have just been delivered, please note they were packed up in a 'LiPo Balance charger' box. At first I...
question
Power Connection To Ez-B V4 Without Using Base Unit

Power Connection To Ez-B V4 Without Using Base Unit

Hi, I'm looking to buy a EZ-B v4 for my Hexapod, but don't want to use the power shell unit to connect the power as its to big. Is there a...
question
Inmoov Builders

Inmoov Builders

For folks who are interested, the parts for InMoov 'Back' have been posted on the InMoov website. It looks pretty good!
question

Cepstral Voice Effects

@Steve G Steve, I carried out your tutorial to change the voice effect in Cepstral, and it works GREAT! Before I found your tutorial I had contacted Cepstral, to see if I could change the voice effect to another device, and said it could not be done. Thanks for the tutorial posting. Much appreciated, Cheers, Chris.
question
Ziggy The Hexapod

Ziggy The Hexapod

I've got around to installing the EZB into my old Hexapod robot called 'Ziggy' Been playing around with the servo auto position control,...
question

Inmoov Builders ( Servos )

Hi InMoov Builders, Did you guys use the 2x Hitec HS805BB servos for the Head 4 axis, or is there any equivalents servos of the same size, the Hitec ones seem very expensive in the UK? Chris.
question

Flashforge Dreamer Vs Creator Pro

Started a new thread, sorry @bhouston for high-jacking your Inmoov thread. :) @Richard You posted: >>>If I had a choice (which I did) between the Dreamer and the Creator Pro... It >>>would be the Creator Pro hands down... I took @Doc's advice and purchased >>>the Creator Pro and it has been an awesome printer.... Smile What was this based on? I...
question
18650 Li-Ion Rechargable Batteries

18650 Li-Ion Rechargable Batteries

Has anyone used 18650 Li-Ion rechargeable batteries before with the EZB. I'm using two in series to get 7.2V @ 3400ma, the ones I chose were...
question
Auto Position

Auto Position

Hi, In 'Auto Position' can the Servo position number in a Frame be displayed with the value in the 'hundreds' units. example: Displaying 100...
question

Servo Offset Configuration

I've created a project in EZ builder for my hexapod with 20 servo's and did the servo offsets and saved the file. But every time a load the project it doesn't asked to load the servo offset configuration file, And I have to load it manually. Why is this? If I use an example project like 'Six' it asks me automatically to load the servo offset...
question

Ez-B V4 Order

Hi, I've just received my EZ-B v4 and other parts I ordered, which has ONLY taken exactly 1 mth from date of order, which is pretty amazing given all the bad Press on delivery dates, I've seen on this forum! :) I know these were for complete kits, and not for individually parts which I had ordered, but still its pretty impressive! One question...
question

Heavy Duty Servos

Hi, What make/model are the heavy duty servos used in the hexapod six. I want to purchase the EZ-B v4 WiFi Robot Controller and create the EZ-bits via a 3DP if possible, and wondering if I can use the 'Tower Pro MG996' heavy duty servos, which I have already. Cheers, Chris.
question

Ez-Builder Mobile

Hi, Where do I find the iOS download for apple devices for the EZ-Builder Mobile, I can only see the download for Android. Although in the blurb it mentions for iOS iPhone.
No live robot hacking sessions have been shared yet.
No user tutorials have been created yet.
No apps have been created yet.
No firmwares have been created yet.
No 3D Parts have been created yet through EZ-Builder.