3D Print Jd Head

okay eureka.the ender-3 is printing well.

i finally found the error,you can believe it.after seeing a lot off video's, i found the problem.its the original paper that you get with the monoprize mini v2. this one

it make your setting to far away from the nozzle.now i use orig A4 paper, and glas bed.all problems gone.

second part anthony robot,the lower back leg.

and a little video.

@Normad6R  Can you show Jeremie your foot and leg design, that is how he should do Astro boy's  foot and knee.   great design I hope you are using PETG or ABS

hi nallycat

i am still using pla cause i have lots off them.the parts still needs some tinkering.

i use this model design robot

this is the link lower back leg.lower back leg

right foot only two holes for the horn.i couldn get the other in line yet.right foot

right ankle colum.ankle colum

servo back cap,this fits in the colum.servo back cap

the servo cap slide in the colum,it fits like a glove.

i have a upper arm also reddy for testprint. the reason behind this robot;i making as cheap possible fight robot. all other parts needs to be adjusted and test print. thats why these are set prived.not test print them yet.

220 nozzle heat/ first layer 50% speed /heat 50 heat / 50 % infill/using raft. parts are 5MM thik.

thank you

oh oke, thank for help i wan to try print with ABS,

hi EricEZ

keep posting here.and ask questions.some will help. what i know is .use 220 nozzle heat,60 heatbed .print first layer half speed. you can print a cube for testing.or a plate test abs

@Nomad 6R          yea,    I'm tired doing nothing..lol, .. I will start working on robot projects again,  like before

EricEZ

what kind of printer do you have?