So I started my second Inmoov without a name yet. I haven't given up on Gideon, my 1st Inmoov, I have learned a lot from my first Inmoov and will apply it to my 2nd Inmoov. Anyway I am a long ways from completed. Here is the right forearm, I'm putting the fingers together soon. I'm having a dilemma whether I wanted to have Finger tip sensors or not. I do want a sensor in the hand somewhere so I can tell if something is close to the hand.
More robots by Redzone
Other projects from the same builder.
Redzone's Gideon Inmoov
Redesigning Gideon's lower body using four EZ-B v4 controllers to separate body parts, relearning commands and crediting...
Redzone's Mo, My Inmoov
Inmoov Mo build progress: assembled torso, shortened neck to fit larger head, awaiting EZB4 to power the head and add...
Redzone's Inmoov With A Slight Modification
Animate an Inmoov robot with EZB4 scripting, expanding servo control with EZB3 compatibility and iterative learning and...
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
Bhouston's A New Dof For Inmoov's Neck/Head
New InMoov neck mechanism adds an extra degree of freedom, improving head articulation; prototype needs fine-tuning.
Ezang's New Mr. Roman - Happy New Year 2020
Arduino and EZ-Builder for New Year 2020 projects
Luis's Using A Mq-? Sensor With The Ezb4 And ARC
Demo video posted-watch the demo and enjoy; creator happy to answer any questions.





Try using a small IR sensor. I have one in a hand of my InMoov so it closes to shake hands with someone. You could have it just sense something close and do whatever you want from there. I used this one: https://www.robotshop.com/ca/en/sharp-gp2y0d805z0f-ir-range-sensor.html The Robotshop has lots to choose from.
@bhouston, Thank you, I was looking at them this mornig be for getting called to work. I seen the digital ir sensor about the same size but could not see the analog ir sensor. This is perfect, I am thinking at mounting it by the middle finger were the slot is on top of the hand under the topserface6 cover goes. I think this would be a good spot.
Thanks again for the link and the tip. Cheers, merne
I have almost completed the right hand and forearm, I am going to use the wires in the finger tips for something else, waiting on parts. I am building this inmoov much slower then my first inmoov to make sure everything is working correctly without any breakage. I will have a video on the right hand soon.
I went for lights in the fingertips instead of the pressure sensors. I'm going to do that in the palm of the hand with an infrared that will close the hand when object is close.
Short video of the LED Diodes.
I forgot to post the video link
Looking good but your video link doesn't work
@bhouston, try it now, it was marked private.
Yup, it works now. Looks good