Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
Path-planning navigator using ARC NMS position and obstacle data to map, log trajectories, and autonomously follow waypoints.
Featured
Control a 4WD with EZ-B and Sabertooth via Synthiam ARC: serial H-bridge tuning, camera/Bluetooth plans, ultrasonic and IR sensing, encoder odometry.
question
Mini-B B9 For Sale
This one really kills me, but for personal reasons I must sell off my Mini-B - 2 foot tall robot b9 from Lost in Space. I combined the Trendmasters robot B9 with a rad drive train and...
5
4 k
JustinRatliff |
question
Dynamixel Actuator Support?
Excuse me if I have posted this in the wrong place. I have read many messages regarding whether ez-b could support the Dynamixel actuator. I believe DJ ordered one back in October 2013 to experiment with it. Although probably not many ez-b users use them because of their cost and lack of serial support, they have been used by every major...
9
3 k
hoolagen1 |
question
Lots Of Robot Parts For Sale!
I have a huge inventory of robot parts that need to go. Servos, motors, pan/tilt bracket with servos, batteries, connectors, wires, sensors, resistors,...
15
4 k
bret.tallent |
question
Ezb/Project Biped Hybrid & 3D Printing
Hi Everyone, First real post! Couple different topics I was wondering if anyone is aware of Project Biped (https://www.projectbiped.com/home). Just discovered this today. Seems like this project has made some awesome advancements with leg design and movement . Self stabalizing being the most impressive. Its a great open source project. I am very...
4
3 k
Ings175 |
question
Hello Ezb Community!
Hi Everyone, I am completely new to robotics. Just discovered this whole world of diy robotics this week. I already have some ambitious plans and hope to utilize the ezb platform to exact them. I discovered the world of 3D priting this week as well. I always thought 3D printing was an unexcessible technology unless you were loaded. I discovered the...
4
2 k
NeRvKil |
question
Get Started With Ez-Robot Revolution
Watch "Get Started with EZ-Robot Revolution" under learning area. Great intro video on v4. Rate 4 1/2 stars out of 5 stars. J Updated: watch video now...
7
3 k
A.Bautista |
question
Snow Blower Robot
Hi, I just stumbled on this website and am truly amazed at the concept and the possibilities of building our own robots! I am thinking of building a snow blower robot that is powerful enough to tackle large and heavy snow like a foot to 14 inches. Ideally I want to automate a two-stage gas powered snow blower to run autonomously via remote control...
1
2 k
thetechguru |
question
Good Base For An Ez Robot Project?
What do you all think? I have the files to get the 3d parts printed so wondering what everyone thinks. https://www.3ders.org/articles/20131021-poppy-open-source-3d-printed-hackable-humanoid-robots.html
5
5 k
Rich |
question
Running Multiple Scripts
i have a script for jaw movement and a script for the say wait movement only one script can run at a time. in other words either the servo jaw runs or the voice comes out not both, how do you fix this
2
2 k
irobot58 |
question
Gunslinger Bob For Sale
Due to personal reasons I am forced to sell off my robots. Here is Gunslinger Bob. He is a modified omnibot with a rad head. He has an airsoft machine gun and nerf cannon for...
1
3 k
bret.tallent |
question
Rolli+Jd Configuration
this one catsh my eye .i have a few questions. will there be other colors availeble in the future. is it possible to ad a lcd in chest whit image/video what he sees. does the...
50
7 k
Nomad 6R |
question
Cyborg Name Decoder Post.
Someone posted theirs in another thread and it seems like it's starting to be popular so, not to hijack his thread I started this one. You can find the CND here....
11
5 k
Troy |