Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
PC Remote UI Client for ARC enables remote robot control via customizable multi-page interfaces from other ARC instances.
Featured
Robot dog chases red balls using Synthiam ARC color and motion tracking; DJ Sures built it with an EZ-Robot kit, servo mods and camera nose.
question
Interfacing A Pir Onto The Ezb
I have tried every which a way and I cannot find a way to hook the PIR to the EZB. I have tried Analog,Digital, etc. I bought a dozen of these units - the ones with the TWO Potentiometers on the PC. You help would be appreciated. Thanks,
28
6 k
bhouston |
question
Micro Gripper
I know someone asked a long time ago about micro grippers and we discussed the Micro Gripper from Servo City. I got one and it is tiny! Servo City says it is compatible with Hitec’s HS-55 servo...
7
6 k
Robot Doc |
question
Servoss
i want to know about the ic used in servo and where i can get it.
4
2 k
Robot Doc |
question
Gripper
This looks cool. Gripper
0
2 k
bookmaker32 |
question
How Can I Prevent Head Jerking While Facial Tracking?
Hello, When facial tracking, there is quite a bit of jerking up and down from the neck servo. I put together a...
6
3 k
JustinRatliff |
question
Vision Tracking With Jd
Hey guys.. here is a quick video of jds cam and using it for reading stuff. hope you enjoy
18
5 k
mgodsell1973 |
question
Website Search Results
When I do a community subject search the results do not fit the viewport / web browser screen correctly. There is a horizontal scroll bar at the bottom of the web browser and the search result images are very large. I think your media queries might be messed up. When I scroll to the top of the screen the top fixed bar jumps and becomes incorrectly...
9
3 k
chrissi |
question
Local Charger Replacement
Hello Everyone, Recently, my charger stopped charging JD. Is there an alternative I can run to a local store and buy, so I don't have to wait for a replacement to be...
18
4 k
Steve S |
question
Question With Wifi
Hi, I just received my JD but can not connect it to the WIFI with my HP computer. To see if it was an issue with the EZ-B I tried to connect it to my Mac Air and it connected. Does...
77
14 k
michaelc |
question
Stop Motion Animation
Hello DJ I'm reading the positions of the dynamixel servos and saving them to a file. I set a pose on my robot then save and the set another pose and so on, Same technique that...
0
2 k
mtiberia |
question
Custom Graph Scripting Control Commands?
I cannot seem to locate any docs on the scripting custom graph? https://synthiam.com/Tutorials/Help.aspx?id=32 Scripting controls section seems to be lacking anything on the Custom Graph control...
6
3 k
DJ Sures |
question
Firmware Question
Hello im having some problem's with my Ez-b v3. The v3 was working fine i updated the Ez builder program which then said i had to update the firmware on the v3 to 16.6. Carried out the firmware all ok got to the end and was told to reboot the v3 i Disconnected the power waited for 5 second's and reconnected the power but the v3 led wont light up...
9
2 k
NewBe |