Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Example NMS Level #1 navigation skill showing subscription to combined scan+location data, displaying position and scan info; source code included.
Featured
iRis telepresence robot: a first DIY build in progress to serve as a telepresence platform for work.
question
Connecting Ezb4 With An Ezbv3
I broke one of my EZB4 boards and was going to temporally use my EZBv3 with EZB4. I know I can connect both. But when I do it sets the calibration to 50 and not 90 as the EZBv4 every though when I only connected EZB4. Is there a way to connect these 2 boards and not lose my calibration from my EZB4 board? I hope I explained this right. Thank you...
9
3 k
Redzone |
question
Scraps Is Getting Updated
They are calling for snow tonite here in the north west so I think its time to updates scraps. I'm not at home now I'm out having coffee thinking. I have already removed...
2
3 k
Wolfie |
question
Mqtt Message Broker
Anyone out there playing around with the MQTT messaging system for the Internet of Things? Just wondering if anyone else is connecting 'other' things to their 'Bot and Builder...
10
7 k
Tameion |
question
Where Is The Ir Port On Robosapien V2 Version
i took apart the robosapien v2 version and its a different board then robosapien model and looking for IR port to hook up EZB
3
2 k
Dunning-Kruger |
question
Digital Wait Usage Question
if I issue a script command such as: digital wait (d23, true, 50) what does the script execution do while it is waiting for the d23 status to change? can I start another script in parallel to process at the same time when we are waiting for the digital port to change? how would one start a parallel script? is there a tutorial on coding parallel...
3
2 k
antguru |
question
Need Sugestions On How To Control A Moded Servo With Ezb For Linear Use
here is a thought that needs some pruning. I need a linear actuator that has...
12
4 k
antguru |
question
Diameter Of Wheels In Developer Kit
I was searching the site for the specific wheel diameter of the wheels in the developer kit and I did not see them. Could someone tell me the size? Thank you!
3
3 k
JustinRatliff |
question
Camera Questions
I will be using three EZ-B V4's in an up coming robot build and I have a few questions. - Will I be able to use three cameras, one with each EZ-B V4 and switch between views? For example: One in the robot's head; one down close to the floor; and one on the robot's hand. - The pan servo will only be able to swing mechanically about 100 degrees due...
7
3 k
VGosine |
question
Female Robot Kd
will the the female version off jd (kd) availeble in molded version.?
5
3 k
Sudo |
question
Where Does The Ultra Sonic Sensor Go?
I need help with this stuff, I'm not sure where to put the ultra sonic sensor in to on the EZ-B v4, which pins, what do I do on the...
19
4 k
Rich |
question
Micro Servo
Hey guys, Does anyone know what brand the new Micro Servo that comes with the grippers is? I seized one up (or burnt it out) and need to get another one. I'm just assuming the international shipping would be pricey so I'd like to find a substitute with the same dimmentions. I did some looking on ebay and couldn't find one that matched the...
10
5 k
Antron007 |
question
Price Dropping Robots
has anyone notest the prize drop from ez robots? very humble from dj&team
7
3 k
Bravia |