Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Kinect Body Control
Control robot servos with Microsoft Xbox 360 Kinect body tracking; map joints to upper/lower body...
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
Featured
Scriptable Remote Mouse for ARC: control PC cursor and ARC window via ControlCommand, using voice, camera or I/O inputs; shows cursor coordinates.
Featured
Robot dog with EZB: obstacle detection, light seeking, touch response, face/motion tracking, ball play; 12 servos, camera, Sharp sensor, Arduino...
question
Ar Drone Color Tracking Using Bottom Camera
I have tried to use ARC for color tracking and following of object using arDrone 2.0 front camera and it works. I want to use the video feed from the bottom camera, to track a moving car. How can i change the code to use in this way? Please look into the matter.
5
3 k
rbonari |
question
Humanoid Robot
is there any way to integrate the ez-b to make a walking robot
9
3 k
Jeremie |
question
Moving 2 Servos With Personality Generator
Hello to All, I have 2 "Eyes" mounted on 2 servos. Each servo is connected to an output via Multi Servo (D0 and D1). I...
11
4 k
DJ Sures |
question
Want To Use Image Buttons As Real Time Indicators
Good Afternoon, I am building a program where I am using all 24 Digital Inputs to monitor relay contacts. I would like to...
18
3 k
DJ Sures |
question
Scripting A Connection To A Second Ezbv4
Upon manually connecting to Board 0, I would like to establish a connection to Board 1 using EZ-Script, process some initialization there...
25
4 k
Dunning-Kruger |
question
Generic Bluetooth Controller
I just discovered EZ Robot and will be ordering JD next week. While I wait I was wondering if it's possible to use ARC to build a mobile app to send basic commands to an arduino quadruped with a bluetooth receiver. If there is a sample similar to this can you please point me to it.
3
2 k
jmp23834 |
question
Ez-B Camera Not Connecting To Camera Device Control
You can see error below. It has never successfully connected to the camera. ARC can connect to ez-b. Under Advanced Settings for the EZ-B HTTP page, Camera Transmit Nagle: disabled Camera Transmit Max Packet Size: 1152 EZ-B Transmit Nagle: disabled EZ-B Receive Buffer Size: 4000 Wi-fi client mode Camera has solid LED Any diagnostics that I can run?...
4
3 k
dassey |
question
Connecting A Neopixel Ring To An Iotiny
I'm trying to get a NeoPixel Ring running off of an IOTiny board. On a EZBv4 the TX and RX are connected: D18 Signal Pin on the EZB to RX on the Arduino, D19 Signal Pin on the EZB to TX on the Arduino Which pins would I attach to on the IOTiny or can I run the ring off of the Tiny? I've tried all of the Digital pins and they don't work. Thanks
7
3 k
mayaway |
question
Camera Image Won't Rotate On Mobil
I'm helping my son build his first Ez-Robot (Kleenex box type). As such I helped him with his first Mobile App which is basically just a test app for...
6
3 k
mtwannabe |
question
Rad-Bot With Sonar Progress
started to actually test robot with ultrasonic sensor to avoid walls/obstacles.I think i need to add real servo motor sweeping with the sonar sensor, though the Laptop is showing some sort of radar sweeping picking up the pings,not sure how that works when the sonar is just taped on the front for now.Also need to modify the obstacle avoidance ,so...
2
3 k
robo rad |
question
Inmoov Servos
I am moving away from MRL to EZB for my Inmoov. I have the entire robot wit all the arduinos etc working at a basic level. I seem to be constantly stuck with too many things with MRL. So I did get an EZB and have toyed with it with a couple of servos. I am really happy with the simpler interface etc. Before I hook up any more servos, Can someone...
1
2 k
bhouston |
question
Smoking Servo
New to the forum and robotics I've searched but not found something to my specific issue. I've Just received a brand new Developer Kit - one of my continuous rotation servos attached to d1 on a EZ-b v4 continuously rotated then started smoking and went red hot. At the time I was just setting up, so I had one HD servo plugged into D0 but nothing...
3
2 k
chrisd |