3D Print Jd Head

hi all

i made a servobrace . to give a servo more support then just the 4 tiny screws .

servobeugel.stl

hi all

does anyone have the lengt of the inmoove tube that used for the legs to the ground ?

thanks

hi all roboteers

first part of the pole reddy .

hi averyone

i have a problem i cant solved with my printer . i put a new nozzle in , level the bed . after some 30 minutes i hear the famous tock sound from the extruder . its a new one few months old . i see this ,see picture . any idea what cause this ? i also regulate the rollement of the heatblock .

thanks

problem solved . it was the heatblock was loose on one side .

hi

some new pictures . of the inmoove legs .

the upper pole will be extended and a metal bar comes inside . i'm thinking to put the inmoove on a bar ( pub , cafe ) seat .  also i changed the base bolt with flat headed ones .

hi all

i finally found the M8 tube nut for the schoulder . the back bolt is same head . the tube nut is 60 MM long , the back bolt is 20 mm long M8 .

hi averyone

upperlegs are reddy to mount on the hips .  waiting on parts. printing the inside of the knees now .:D

HI all

why printing a 2 part file when you can print it in 1 file ? way stronger and more straight .

waiting for filament to arrive