This is my new pocket robot: Navigator. Constructed from aluminum, cut with scissors, and assembled with rivets. Powered by a 11.1 v lipo battery, 1600mah passing through a regulator 8v (good voltage without fan) to feed ez-b. All heatsinks remain warm and has a great autonomy in the current configuration. My purpose is to experience in navigation with only the essentials, and start with a ping sensor and squeeze the most of what can be achieved. The second phase incorporates collision sensors with switches on the side of the robot and delanera. Then I would like to taste the lateral measurement with a ping sensor on each side of the robot (these would be fixed) and thereby expand the project in a modular, finishing with a camera on an upper floor, compass, etc. ..
More robots by R2D2
Other projects from the same builder.
R2D2's Robot Sphere (But Call Me Rs)
Robot draws a sphere with low-cost servos and a retractable arm housed in a reinforced 28cm PVC Christmas ball for...
R2D2's Rsp Robot
Robot RSP: building a 5.4 ft robot with ez-b v3, traction system, ESCs, voltage regulators and batteries-community...
R2D2's Robot Building
Build a 2.5-3 kg butler robot with ez-b: 15kg continuous wheel servos, 2-axis head, arm servos, 3 Ping + Sharp IR...
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
Fxrtst's Quantum Lift- Model CR-99
4WD sci-fi vehicle drive with EZ-Robot 360 servos, independent 4-wheel steering, mobile app control and IO Tiny; tight...
Lumpy's Lumpy's Wall-E
Custom Wall-E robot build with servo-mounted eyes, mini-servos for arms, sonar installed, reinforced head mount and...
Ezang's My Tightrope Robot Without The Squeak, Sorry For The...
Tight Rope robot without the squeak - enjoy a smooth, silent balance performance




Cool little bot
In this wonderful pastime can be used almost all, this is the first chapter, is also in the cloud:MinirobotNAV.EZB
Cool robot!
Could you take a video and post it. We really like videos
- Josh
As always, you're amazing R2D2 ! Nice robot. My Verop platform was intended to do the same thing. Basic navigation and developing algorythms. I hope to post some new pics soon of my EZ-B controlled lawnmower based on that platform. I'm waiting for my new kit (quite some time now)...
Very friendly Phg, I'm thinking about making videos Josh, in fact I would like to capture the video from the roof down to see the navigation in a room and then apply the quick-motion effect to video. I do not think it takes much to do, less than 10 years, haha??.
Yeah, tell me about it ! Time is what it's all about these days... Anyway, I'm looking forward to see your videos. Please hurry.... ;-)
A combination of radar ping and a dash of random spins to the left, this combination has a tendency to approach the walls in your navigation. The script makes random sometimes enter into a silly robot is at loop when in a corner, making it take longer to get out of the corner, but sometimes acts as an intelligent refine the trajectory, some magic. The video speed is doubled: