All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle checks from the latest scan.
Featured
Mr. ConeHead 2019 video to watch, hope it's not too long
question
3D Printer . Is It Good Or Bad ?
Less then $200.00. I'm sure it's not that great but do you think it can print a good table top Inmoov head?...
18
5 k
Perry_S |
question
Happy New Year's
Hello guys! Wasn't sure if anyone had already posted something like this today but here we go: Happy new year's everyone and I wish you all the best for next year! Although I've spent most...
13
4 k
Jeremie |
question
Inmoov Top Stomach
I'm switching to @bhouston Articulating Stomach for InMoov: https://www.thingiverse.com/thing:1409964 and no longer need the old Top Stomach Assembly I'll be happy to ship it to...
5
4 k
mayaway |
question
I Wan Using Ez-Board For My Robot Fish But I Dont Know Using What For Connectivi
www.instructables.com/id/RoboFist-made-From-pvc-water-pipe/...
24
7 k
robo rad |
question
New Movement Panel For Roomba And Create Robot Platforms?
@DJ, Just wondering if you have come up with a new movement panel for the Roomba and Create Robot Platforms? Quite some time ago you mentioned you were working on it and just checking if you still plan to do this? Thanks Much....Rick
5
3 k
rbonari |
question
Cloning Ozobot
OZObot is all the rage they have 2 wheels and a camera and follow a color code programming system. Has anyone thought about cloning the functionality of them with an EZB
7
4 k
David mcsdaver |
question
Ezb Connect In Ap Mode Only V0.4A
Good Day, Strange behavior on EZB. Connect to ARC in Apmode but gear icon missing. Client mode green led just flashing. If it connects in client mode to ARC gear icon also missing My new EZB just received connect instantly on ARC. Is there not a firmware upgrade I can use the flash the V0.4a unit ? Can it be flash with the flash util via wifi on do...
4
2 k
ptp |
question
Powering H-Bridge And 12V Dc Motors And Feedback Pots
My next project is a BB-9. If anyone knows of it, I'm using the Joe Drive and 12v DC Planetary Motors with BTS7960 43A High Power Motor Driver H-Bridges. I'm using a 12V 20000mah battery for power. If I power the EZ-b with 12v, can I run the power from the digital port straight to the H-bridge, or should I power it from the power source? Thanks
5
4 k
ptp |
question
Hbridge And Motor Speed
I'm making my first wheeled robot using the ez robot v4. I recently connected an h-bridge to my ezb v4 without a problem. The directions were clear and concise. Operating the...
11
4 k
DJ Sures |
robot
Ellis's Max The Robot
Max shows his moves in a short clip-watch the performance and share your feedback.
27
8 k
Ellis |
question
4 Wd Roli
Hi Everyone I was wondering if anyone knew where to buy two extra motors and gearboxes for the Roli Rover as they are not sold in store (except as part of the roli body kit which is therefore expensive)? With extra motors and the gears it would be easy to turn Roli into a 4 WD vehicle that can carry extra weight. I checked this link but it does not...
1
3 k
DJ Sures |
robot
Gregersen's My Next Robot Project Will Hop
Small busy robot controlled by a clever computer via WiFi, possibly powered by solar energy for remote wireless operation.
0
2 k
gregersen.kim |