All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Control Waveshare servos (TTL/RS485): set position & speed, release torque, read position. RTS option for converters; reverse-engineered protocol.
Featured
Repair and upgrade a Dagu RS024 12-servo hexapod: v3 controller install, mini-servo replacement, and learning actions/frames.
question
Meccanoid To Ez
Hi Guys I am new to robots and programming - I intend to convert my Meccanoid 2.0 XL to Ez B v4 as I wish to have my robot roam by itself and respond to things/faces etc as it goes tell jokes/stories and be interactive specially for my grandson. The question I have refers to whether the EZ B v4 has onboard memory and what ype of memory this is. I...
7
2 k
DJ Sures |
question
Quad In The Making With Io Tiny And Micro Servos
I have printed this quadraped and I am building it. https://www.thingiverse.com/thing:989937 I am using these servos: Tower...
1
3 k
DJ Sures |
question
Recommendations For Multi-Meter?
The battery in my old Radio Shack multimeter corroded and even though I cleaned it up, it is dead. (of course, I need to check continuity on the bus fuses on my furnace that died on the coldest night so far this year, so great timing). If money were no object, I would buy a Fluke, but I rarely use it, so looking for something under $30. Does anyone...
3
3 k
Nink |
robot
Moviemaker's Latest On Sally
Sally robot on OmnibotBase with EZB-4, awaiting sensors to complete build after retiring a bulky wheelchair robot
11
7 k
MovieMaker |
question
Script Console Question
I have used the Script Console over the HTTP server before for movement commands and those still work without issue However, I get an error when using ControlCommand() or...
4
3 k
faengelm |
question
Jd Is Sick
wel jd has played outside in the cold for 40 min. and now he has the flu.
6
3 k
Nomad 6R |
release
Release 2018.01.08.00 (Happy New Year)
Synthiam ARC update: fixes plugin updater prompt, restores EZ-Robot 640x480 camera, adds deep-learning camera training and auto project backups.
6
5 k
Sebediah |
question
Bing Speech, Cognitive Vision, And Emotion Questions
The new plugins for Bing Speech, Microsoft Cognitive Vision, and Emotion do not have a place to enter the API Key. They all report 'Server was unable to process request. --> Incorrect username/password or unknown user'
13
4 k
DJ Sures |
question
Ezr Camera V2 - 640X480 Image Broken
EZ-Builder is running the last version. Tried with an empty project and camera object. Bug ?
1
3 k
ptp |
question
Need Modual Repaired
Hi all, I tried to solder in a speaker to my ezb modual , and screwed it up, no it no longer works. Is there any where I can send it to be repaired?
1
2 k
Dunning-Kruger |
question
My Left Foot
When I power JD on his left foot is not aligned (both servos). When I connect it is fine only happens when I power on. When I go into diagnostic mode it goes to 90 degrees fine. Looks like I have...
3
3 k
Nink |
question
Robots Of Stephens' Garage
Thought I would upload a photo of my various robot projects. Left to Right On Shelf: 1. Robosapien with IR Hack shown by DJ to run from EZB V3 2. Arduino "Paint...
8
3 k
MarkTheBotBldr |