Robot Projects Built with Synthiam ARC
Explore robots built with Synthiam ARC, including project photos, videos and build notes. Find ideas for your own robot.
robot
Tony1952's My Rolly Boxbot
Rolly: a Wall-E playmate on tracks using a 2WD Rover 5 base, EZ-B v4, ultrasonic sensor and JD head, dual LiPo batteries for extended play.robot
Steve's Lynx Robot 1996? Reborn W/Ez Robot
Vintage Lynx robot arm reborn with EZB3, internal LiPo and Synthiam ARC for wireless control, Auto Position and voice commands.robot
Jdebay's What Should I Do?
Decide whether to wait for a replacement servo or use a faulty servo as a placeholder to fine-tune your JD robot's movements.robot
Brw's New Robot And A Bluetooth Question
Troubleshoot Bluetooth pairing to a v3 board on Windows 7/8.1 or tablet, plus calibrate servos to 90 degrees for your six-based robot.robot
LJ's Project Grim Reaper
Build a Grim Reaper Halloween prop with EZ-B v3, servos, ping sensor and LEDs to animate jaw and eyes-hands-on STEM fun for kidsrobot
Jdebay's Intro To Zipper My Hexapod-Six
Zipper hexapod-six: introduction to my six-legged robot Zipperrobot
Luis's Multiple Sensors On One Uart
Integrate a dual-axis compass, four HC-SR04 ultrasonic sensors and an Arduino Pro Mini with EZ-B4 for robot orientation and ranged-angle snapshots.robot
Luis's Using The Sure Dc Ss503v100 With Ezb4 From Ez-Robots
Connect Sure DC SS503V100 compass to EZ-Robots EZB4 via UART: RX/TX wiring, set OPT high to 3.3V, 4ft...robot
Tony1952's My Wall-E Powered By Ez-B V4
Control WallE with EzB V4 and EzBuilder: continuous rotation servos, tracks, WiFi, voice, face tracking, scripting and power troubleshootingrobot
Jphillipsnj's Inmoov Project
InMoov life-size open-source 3D-print robot project using EZ-Robot and EZ Face, exploring Kinect support and VB.net integration.robot
Sudo's Project Shogun
Shogun humanoid: 15in bioloid-based EZ-B robot with 26 DOF, wall-powered, stands and waves; progress, photos and troubleshooting for browning-out EZ-Brobot