Robot Programming Questions and ARC Help
Get help with ARC scripts, Robot Skills, hardware connections and robot behavior. Browse questions and answers from the Synthiam community.
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
I Make Robots Crew Socks
Autonomous AI
Autonomous AI robot skill with vision, speech, movement, animations, and self-directed task...
Azure Text To Speech
Azure Text-to-Speech for ARC: generate natural-sounding robot speech with Microsoft Azure voices,...
Exosphere
Telepresence and remote control for any robot with human-assisted tasks, video, audio, and AI...
Azure Speech Synthes…
Microsoft Azure neural text-to-speech for ARCx scripts and skills, with multilingual voices, SSML...
Rtk Gps
RTK GPS rover/base skill with NTRIP corrections, cm-level pose, heading support, map fusion, and NMS...
Outdoor Navigator
GPS-driven outdoor robot navigation with satellite maps, saved waypoints, zones, no-go areas,...
WebSocket server for ARC: accepts clients, stores messages, runs per-message scripts, tracks connection status, supports debug, needs Windows admin
H-Bridge Dual Dc Motor Controller
Hi, I picked one of these of eBay while i am waiting for the 2.5 amp controller from the store. I was able to get it to work. It move forward backward and...
2
3 k
Swaping Out Bluetooth With Synapse
Hi, i have just orderet a robot kit and want to implement it in a rc car so i can controll it from a distance. I have read a little about synapse 2,4ghz...
4
2 k
Bluetooth Disconnects If Left On All Night
Hello all, I have learned a lot reading everyones posts. Does anyone else have this problem with their bluetooth disconnecting. I have...
19
5 k
Does Anyone Know If The Little Servo Tester That Is Going Around
Does anyone know if the little servo tester that is going around will work with 7.2 volts...
12
5 k
Serial Gps For Ez-B
Has anyone looked at something like the Locosys LS20031 as a serial device attached to the EZ-B? Requires 3.3V. Output is to a TTL-level serial port. IT outputs the data in more than 6 different National Marine Electronics Association (NMEA) GPS sentences (user selectable) at a rate of up to 10 Hz.
0
2 k
Want To Buy Starter Kit, But From Where?
I've emailed EZ-Robot without response, which makes me a bit iffy about ordering. But I'm interested in the EZ-Robot starter kit. I live in Calgary and would like to arrange to come pick a kit up rather then order online, pay for shipping and wait for delivery. Does anyone know who I can get in touch with to discuss this further?
12
3 k
Suggestions For Accelerometers, Gyroscopes, And Gps Receivers?
Suggestions for accelerometers, gyroscopes, and GPS receivers? I would like to build a model car...
2
2 k
I Need Help With My Wall-E
Hello, I am trying to get the gearbox off the wheels so I can add my servos. I see screws under the wheels and I am afraid that I will break something if i mess around. Can someone please help me?
8
2 k
Battery Voltage Monitor
This is really a question aimed at DJ but if anyone else knows the answer please chip in, i want to know how i can use an ADC port to monitor the battery voltage on my 6v...
21
6 k
Heavy Duty Servo Requiring External Power Source
If I had a Heavy Duty Servo Requiring External Power source ,HOW would I hook it up to the servo? My batteries now are...
13
4 k
Rover And H-Bridge.
I'm trying to get a Rover 5 chassis going with EZ and an H-298 H-Bridge. I've watched DJ's video but I have a couple of questions. I'm using an external source to power the motors, connected to vcc and gnd. I have all the signal wires connected to digital pins on the EZ. 1. Do I need to connect the +5V line, or will the board draw power from the...
4
2 k
Idea For You D.J.
Some others may benefit also. Because of our agreement not to talk about other robots, I will not mention names. There were two robots that in the last two years recognized themselves in a mirror. that recently, last year was very popular reading. They were said to be self-aware. WARNING: This MAY go over some peoples head. (Like Mine) Now, Moving...
4
3 k