Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
Overlay image packs onto camera feed and map images to control-variable ranges with auto/manual assignment, position and sizing options.
Featured
JD Spock 3D-printed Star Trek TOS phaser sized for JD, color-matched EZ_OST_phaser.stl and printable paper headpiece template (SpockJD.pdf)
question
Can 7.4/6V Servos Be Fried By A 11V Battery?
My humanoid has a 11v battery, and i'm afraid that it might fry the 7.4/6v micro servos. Will this fry the servos?
27
8 k
Dave Schulpius |
question
Ez Robot Navigation?
Has any thing changed that might effect navigation on Community or EZ Robot? I found on my 8.1 windows makes me choose below the windows icon, unless the EZ message shows, no navigation? It started when the "ask us" help message appeared on EZ Robot? Steve S
6
3 k
Robot Doc |
question
8.1 Connection Question
After 8.1 windows update my com port changed from 5 to 3, but it connected. Today I decided to try processed video on my new pc. I charged the camera, plugged in the wireless camera dongle, but could not connect to EZB. After removing the cam dongle, I was able to connect. I installed the cam dongle and had processed for a short time (something I...
1
3 k
Steve S |
question
Brookstone Rover 2.0 Support
Can ARC support the brookstone rover 2.0? Really want to know cause i like newer.
4
3 k
Snayper |
question
Androbot Inc.
I had no idea the founder of Atari made a robot company in the early 80's. Here are some neat videos of Androbot - Topo and Bob
11
10 k
MovieMaker |
question
Connection With The Following Sensors/Addons
I wanted to know how one would connect the following to the EZB v4 1) Laser 2) Laser Module 3) RC Car https://hobbyhobby.com/store/product/349263/58034-1-10-Slash-2WD-SC-RTR-w-2.4/ 4) Digital Compass - Ankit
4
4 k
ankit1 |
question
Ez- Bits
Hello to all, I have been absent for some time but am back on board. I have my order in for the EZ-B V4. I have been looking for the STL files for EZ-Bits to no avail. I know they are in the software...
4
3 k
bookmaker32 |
question
Talking Head
Hello, my students want to have a talking head and we are going to sync the servo controlling the jaw with the voice. I don't see anywhere how this can be done except through a pc. I am hoping to use the ez-b otherwise I may go back to arduino. Please advise on what additional hardware/software is needed to have 30 seconds of singing. Thank you FC
1
2 k
Rich |
question
ARC Background
Hey guys, I know this is a very short question but is there any way on putting a different background on ARC ? Thanks Yours sincerely SuperCreagh
2
2 k
thetechguru |
question
Replaced The Rectifiers And A Diode-Ezb Working Again!
Well, I replaced the regulators again. And I replaced a diode on the pc and the EZB started working again. It is a Tough little board.
5
2 k
MovieMaker |
question
Can You Put Ez-Robot Software On An Ipod Touch
Hi guys I have a ipod touch 3erd gen and i was woundering if you can countrole your robot whith your ipod but whith out useing...
11
3 k
thetechguru |
question
Neck Mechanism
Here is a cool neck mechanism. It is very expensive so it would be neat to see if I could fabricate it cheaper by getting parts from ServoCity. CES-NECK Edit: I priced similar parts from...
2
3 k
irobot58 |