Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
4-series bar chart for real-time sensor comparison in ARC; set titles, values, RGB bar colors and conditional coloring via EZ-Script.
Featured
Humanoid teddy robot upper-body project inspired by the movie A.I.; Bluetooth restored via new laptop, photo build details and feedback welcome.
question
Need A Standard Sized High Torque Servo? Here Are Two New Options
I usually like to buy from a place I can get some kind of warranty from or at least a...
8
4 k
jstarne1 |
question
Amazon Delivery Drones
After hearing this everywhere I went online and researched it. Turns out, Amazon has come up with a delivery drone system. check out the vid on the link. CBC Report
11
4 k
Dunning-Kruger |
question
Easy To Make Robot Grippers?
For an upcoming project I need a simple, easy to make, cheap robot gripper. I have some ideas but I want to see what the community can come up with.
38
12 k
CardboardHacke… |
question
Angle Sensor Compatible With Ez-B V4
Hi fellas, I was planning on using an angle sensor to get readings in 2D plane, just the horizontal. I was wondering if anyone here has experience using such sensors in conjunction with EZ-b. Following are the two low cost sensors i've considered so far, any advises and tutorials would be wonderful. Option 1;...
2
2 k
ankit1 |
question
Windows 8 Update To 8.1
This is a tutorial and update with my windows 8 updating to windows 8.1 " free update" that takes a long time, and ARC. I could not connect to ARC with my old...
9
4 k
Robot Doc |
question
Ways To Add More Servo Ports?
Hello! I've been building a humanoid robot (ready for a EZ-B v4!) and i was wondering if there was any way to add more servo ports to the EZ-B. I'm going to have to use up all 24 servos for just body movements (each arm has 5 servos, and each leg has 6) and i want to add some sensors/more servos. I've been looking at this:...
10
4 k
Antron007 |
question
Video Tutorial
hi DJ is there a video tutorial from robosapien v2? blush
2
2 k
Nomad 6R |
question
Omnibot Project
Inspired by this website and it's community I have just got hold of an old omnibot for my first attempt at creating an ez robot. As this is my first time I need some help and advice as to what I can and can't do and thought I would put my ideas to you guys and see what comes back. My first idea is to remove the original drive and replace it with...
11
3 k
Rich |
question
Lcd For Ezb
hi.will there be an LCD screen availeble for ezb?
10
4 k
Antron007 |
question
Ez-B Powered By Roomba
Here is one way to eliminate the need for an additional battery to power the EZ-B. The Roomba SCI 7-pin mini din connector provides unregulated battery power at 1/2 amp...
6
4 k
Rich |
question
Another Omni2000 On Ebay
Here is an Omni 2000 listed at a "buy it now" price. The pics show it in pretty good condition. If you want to fix the arm I may have the original part you need. However, you probably want to replace those gears with a servo anyway.
0
3 k
Troy |
question
Name That Bot.
I was surfing and found this. It's not from any TV or movie in case you're wondering. I added this thinking it may give some inspiration.
8
3 k
MovieMaker |