Robot Programming Questions and ARC Help
Get help with ARC scripts, Robot Skills, hardware connections and robot behavior. Browse questions and answers from the Synthiam community.
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
Robot Sticker
Autonomous AI
Autonomous AI robot skill with vision, speech, movement, animations, and self-directed task...
Azure Text To Speech
Azure Text-to-Speech for ARC: generate natural-sounding robot speech with Microsoft Azure voices,...
Exosphere
Telepresence and remote control for any robot with human-assisted tasks, video, audio, and AI...
Azure Speech Synthes…
Microsoft Azure neural text-to-speech for ARCx scripts and skills, with multilingual voices, SSML...
Rtk Gps
RTK GPS rover/base skill with NTRIP corrections, cm-level pose, heading support, map fusion, and NMS...
Outdoor Navigator
GPS-driven outdoor robot navigation with satellite maps, saved waypoints, zones, no-go areas,...
VADER sentiment analyzer for ARC returns positive, neutral, negative percents and a compound score from text; enables emotion-driven behaviors.
Bot To Follow
Question, I am still working on my 1:1 R2 and I will be using saber tooth controller with my EZb. I am really wanting R2 to follow me at a certain distance when he is on auto (able to switch to my control at will as well) I have the EZ camera ( if that helps ) .. Has anyone out there mastered the way to do this ( bot follow..ect ) with switch to...
16
5 k
Basic Led Light Question
Hello again. My current question regards LED lights. I just want to turn them on and off. I searched the forum and all of the forum responses regarding LED lights were much...
25
7 k
Which Digital Pin In Vcc
Hello, I am sure a simple question, but I can't seem to find the answer. The EZB-4 info states: "Each port has 3 pins, which are Gnd, VCC and Signal. The Gnd and VCC are for powering the device connected to the port. The Signal pin is connected to the EZ-B Microchip for reading or writing data from Digital or ADC. The Gnd and VCC pins are not...
13
5 k
ARC Designing
probably a simple thing but how do you turn image of servos around to fit bodies in the design window
2
3 k
Humanoid Head Or Board Question
Hi I need help my recent order needs replacement parts what is the process to get this done.
15
3 k
Rgb Unit On Humanoid Head
Are the i2c ports on the board auto sensing or is each one of the 3 a specific address? I found what looks to be the address range 0xA0, but I've also found V0 virtual...
24
5 k
Roomba Wifi Kickstarter
Looks like a neat idea, the WiFi unit is small. The iOS and Android app looks interesting. The EZB(4) can do a lot more using a UART port and some two way conversation with the Roomba 500 through 800 models Roomba WiFi
2
3 k
Jd Webserver
Can I set the IP address of the webserver in my JD? My wireless network is 192.168.12.1, and I'd like my JD to be on that subnet. Thanks
8
3 k
Robot None Operational After Been Fully Charged
Hi I went through all the tutorials, calibrating the robot and was fully functional then the battery died. I put the robot on charge as per the tutorial guide and waited for the green light to clear. When i came to turning the Robot back on? Nothing? Could anyone advise? Thanks Kris
3
2 k
Bit Builder Link Wrong In ARC
I was going to look at the Bit Builder, under Project in ARC and the link to the " - STL Design Files and specifications for EZ-Clip, EZ-Robot Servos, EZ-B and other parts" is wrong as the hard coded link is: https://localhost:80/Community/Revolution/DesignFiles.aspx The external link I believe would be:...
0
3 k
Servo Speed - Only Fast, Medium And Dead Slow Available
Hi gang, I have no problem getting servos to change speed using the ServoSpeed command in scripts and if I...
23
8 k
Control Command In A Variable
Is it possible to insert a "control command" in a $variable? ex: $Female= ControlCommand("Speech Settings", SetVoiceGender, "Female") for now the result faults with "Missing String Quotes or Invalid Expression:" any idea?
7
3 k