Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination, position, size, border, processed frames, and...
Featured
Restore Teddy Ruxpin and Grubby with EZ-B v4: lip-sync speech, eye/mouth/head motion, mobile wheelchair/roller-skates, camera tracking and upgrades.
question
Revolution Roli Green Flashing
Hi, I have bought the Revolution Roli. I have followed the instruction to calibrate the servo. And I have continue the instruction...
18
4 k
Steve G |
question
Myo Self Dianostics
i found this page maybe usefull myo
3
3 k
Steve G |
question
Ezb V4 Power Shield , 5 Volt, 6V, 7.4V , What Do You Want?
Hello Everyone , I had this idea when the v3 was around , but I wanted to wait until v4 was in...
25
7 k
CardboardHacke… |
question
Robots Exploration
I want to make an exploration project. Basically, one PC will control two ez-robots to search an object, if one robot finds it, it will send confirmation message to the PC, then the PC will send another message to the other robot to stop it. The key point is how to transfer and receive data wireless. Does anyone have any ideas to do this?
18
4 k
Gerald |
question
Multiple Ez-Robots
I have a question about the sending data between multiple ez-robots. Basically, my PC will connect two or more ez-robots, how can I receive data from one robot and send data to other robots.
14
4 k
Gerald |
question
Assigning Servo On The Ez-B
Sorry but I'm not good at instruction. So how do you assign the servo on the pins of the EZ-B so that the software knows which ports is which. I'm a little bit...
4
2 k
deuel18 |
question
Is There Any Way Of Powering A Jd Or Any Other Ez-Bot From Anything Not Battery
I know I am going to be asked about battery life no end of times, I just wondered if there was any other power source for limited motion. Like some kind of umbilicus that can bypass the battery, but still use the body with shoulder servos - would be hand for schools working with scripting.
9
2 k
DJ Sures |
question
Need Help With Jd-Bot Connection
trying to control a jd-bot from a Fujitsu tablet, but ARC says cannot connect to ez-b. Bot is working fine, can control from my dell with no problem. Any clues what to look for?, have removed AV software just in case (was mcaffee- ugh) thx Paul confused confused
7
2 k
paulsk |
question
Facial Recognition Question
Hi, I've been through the tutorial on facial recognition. Two issues: 1) I'm getting 'false positives.' Roli see's my face and moves (Enable Movement Tracking is...
9
3 k
tom.caine |
question
Where's Roli ?
For all you "Where's Wally" and "Where's Waldo" fans... Where's Roli ? ? ?
16
5 k
Nomad 6R |
question
Radar Servo Position Scaling Not Correct
Since DJ changed the servo scaling from 0 to 100 to 0 to 180, the radar scan does not perform as expected. The scan does not go from 0 to...
5
3 k
MarkTheBotBldr |
question
Newb Question, Can I Edit Poses By Typing?
I am trying to edit poses, and only appear to be able to click and drag to change values for each servo. I want to just click and type values, but that has not worked. Export and import gives me a work-around, but the rest of Builder is so user friendly I am hoping I am just missing something. I go into auto position, click settings, then select or...
3
2 k
DJ Sures |