Robot Building Questions
Subscribe to ARC Pro, and your robot will become a canvas for your imagination, limited only by your creativity.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Add Google DialogFlow NLP to ARC: conversational intents, parameter prompts, scripted responses, service-account setup and programmatic robot control.
Featured
Omnibot 2000 showcases Synthiam ARC: Wii Remote control, Glyph vision recognition, Tablet PC touch control and materials list for building.
question
Servo Causes Program To Freeze
I am doing speech and "robot move forward" and the servo runs but then I can't shut it using the servo control and the ez program keeps freezing on me. When this happens I get the message "I have successfully connected to your network" and why this is resetting, I have no clue. Anyone have any ideas? Also the program keeps...
4
2 k
Dunning-Kruger |
question
Controller Stuck In Client Mode
I unboxed a new hexapod kit yesterday. It was working fine until I switched from AP Mode to Client Mode. Now the controller is stuck in Client Mode and will not reset. (Note: Performance was herky-jerky in Client Mode, so I wanted to switch back to AP Mode where it ran smoother.) I have pressed the reset button on the controller but it does not...
8
3 k
vsljoe |
question
Specific Recommendation For Power Adapter
Hello, I made the leap after a fair amount of research and bought an ezbv4 last night. My initial application is static so I deferred...
30
8 k
Redzone |
question
Connecting An External Speaker To The Ez-B V4?
Hi, I wonder if it is possible to connect an external speaker to the ez-b v4? Maybe even a stereo speaker or 5.1 system?
6
3 k
Andy Roid |
question
Driving Stepper Motors With Ezb V4
Done a lot of looking on the forum and still can't figure it out. I am building a pretty heavy duty robot and want to use the power of stepper motors. Question is - how do I interface the stepper motor with the EZB? I have Kollmoren P22 stepper motor - 8 wires, capable of bipolar, unipolar and parallel operation. I guess I need a recommended drive...
4
3 k
castlephelps |
question
Connecting Leds To The Ez-B V4
Hi, I am just taking my first steps with my ez-b v4. I would like to connect some LEDs to the ez-b v4. Maybe some colorful ones that light permanently and an LED that can switch colors? (RGB-LED?) Which LEDs would be good for this little project? I already have a package with LEDs and resistors, but I am not sure if I can use them for this:...
10
4 k
sucipher |
question
Dc Motors For The Ez-B V4
i want to buy the ez-b v4 develepor kit to build a robot. but want to know if the ez-b v4 can handle dc motors. if it can't, how could you make it so it could?
4
2 k
dederdegamerta… |
question
Slow Performance
When I do a benchmark test of the Read 300 ADC I get a result of 5 reads per second. I know it use to be around 65. I thought it was because of the "Limited" WiFi message, but...
83
9 k
DJ Sures |
question
Servo Profile In Lessons
I was about to post a few tips on starting to build and use the Six robot in one of the threads (since I just put one together) when I realized the Servo Profile step was missing from the lesson steps. Looking around, the only references to it I found had to do with JD and a couple having to do with loading one from mobile apps. In the lesson steps...
4
3 k
DJ Sures |
question
New Six Camera Failed After A Few Minutes Of Use
I just got a new Brookstone SIX. After assembly, I was starting to use it, and the camera suddenly stopped working with this...
16
5 k
WBS00001 |
question
Master Control Unit For Omnibot 2000
hello all, I have to search a remote control up and running for my robot OMNIBOT 2000 impossible to find one on ebay, no one sells? Is that-among quelquin you have a sell me? or moin indicated pourais or I buy one. thank you sincerely eric
0
2 k
bernard eric |
question
Some Great Idea Maybe
would this be something for the ez robots.
2
3 k
Nomad 6R |