Robot Building Questions
Stay at the forefront of robot programming innovation with ARC Pro, ensuring your robot is always equipped with the latest advancements.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
I Make Robots Crew Socks
Exclusive to robot builders, these are a one-size-fits-all solution up to a men's size 12. The construction is 73%...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Control Kondo KRS ICS2/3.5 servos via EZ-B UART; experimental, untested. Supports chaining, virtual servo ports, Release() and Servo() commands.
Featured
Beware of robots on Friday the 13th-thanks to Justin for the face mask.
question
Companion Robot
Hi everyone, as im going to be bringing 2 vintage robots into the 21st century, i am wanting also to eventually build my girlfriend a companion bot. She lives overseas in asia, and it's...
2
2 k
Toyhackrobotic… |
question
Ez Lipo Balancer/Charger
since I had quite a severe Lipo battery explosion a few weeks ago that nearly set my place on fire,due to my lack of understanding charging modern battery packs. I have made it my mission to research everything about all battery types Nickel cadium,Nimh high power and Lipo high power. I do have a few older nickel battery packs that I have re...
1
2 k
robo rad |
question
Inverse Kinematic
This is a 2 part question on Revolution Six. 1. Has anyone added servos to Six to give it 18 dof? 2. Has anyone added code for inverse kinematics to improve the gait?
22
5 k
fxrtst |
question
On/Off Switches
I'm very new to building robots and I was wondering if someone could tell me how to connect an on off switch with the LiPo battery to power the EZ B V4 controller?
3
2 k
Dunning-Kruger |
question
Ezb-Rad Robot Ready For Field Investigating All By Itself
Absolutely thrilled at how easy it is to program the paranormal self-investigating project Rad robot using the EZB-4 system . All I can say is for the small cost of the EZB computer and an old 1990 toy robot bought for a few dollars at a flee market,this is amazing guys! thank you so much for developing this system! i am ready for actual out door...
14
4 k
Toyhackrobotic… |
question
Ez-B Battery
Hello DJ Sures, Me again, I just had a quick question about what batteries you can use with the EZ-B. Can you use any Li-Po battery aslong as it is under 9v? If so, what would you suggest? Thanks, Joshua
1
2 k
Dunning-Kruger |
question
Replacing Servos In Jd's Foot
I'm upgrading the servos in JD's feet to HDD and I think I remember seeing detailed step by step instructions on how to replace the servos.... but after extensive searching I can't find them Any idea if such instructions exist? Thanks, Frank
3
3 k
DJ Sures |
question
Feature Request - Invert Option On Auto Position Screen
As a newbie I have been playing around with a lot of different frames/actions to get used to the auto position control. I kept getting confused on the direction the servo was moving, espicially when SIX was not connected. To make it easier I changed the servo orientation so when I increase the servo value it would always move the servo forward or...
0
2 k
jmp23834 |
question
Led Battery Charging Test
Hi everybody, Could someone help me with this bac to basics trick which should allow me to connect an LED to the leads which connect to the battery charger when my robot docks so, when charging current is running through, the LED lights up? I wish to do this without using any controller so no ADC port, no HIGH/LOW digital port, just an LED and...
7
2 k
robo rad |
question
Change Colour From Rolli
Sometimes I see robots of EZ in other colors. What is the best way to change the color? I thought of paint spray or foil? I thought I was waiting for your experiences. The head of JD makes me most worried. I have to take care of my eyes. How did you do that?
1
2 k
CardboardHacke… |
question
Iotiny And Dynamixel
How can the ioTiny be used to drive a Dynamixel AX-12 servo chain? I wrote an init script UARTInit(0,5,11500) and got: Error on line 1: UART port is @ 0, 1, or 2. If only pins 0,1,or 3 on the Tiny can be used as a UART can the Dynamixel plugin be expanded to include a UART pin choice?
12
3 k
fxrtst |
question
Found This Site For Chatbot Developement
Hey guys, I found this site... It seems to be pretty easy to use if you are up to build a personal flavored chatbot! Its easy to integrate tasks like alarms, weather reports etc, as it comes with a bunch of pre build agents as addons! Let me know what you think... https://api.ai/
4
2 k
Mickey666Maus |