Robot Building Questions
Synthiam Credit
Your Credit: $0.00
Lower the cost of Synthiam products by contributing to the platform and community.
Recent Robot Skills
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with hardware-timed PWM,...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for real-time...
Hitachi-LG LDS Lidar
Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino...
Featured
Real-time VAD using 300-3400 Hz FFT to trigger scripts on speech start/stop, with sensitivity tuning, live audio level graph, and TTS pause.
Featured
HEMI home-health robot prototype lifts and transfers patients using high-torque servos, actuator, sensors, EZ-B control, Sabertooth drive.
question
SMS Integration
Hey Community, Has anyone connected EZ-B using text messaging. I have a project where I need to send commands to and from the robot using SMS. Was wondering if there is already something out there before I start. Move servo. MMS a photo back to phone etc. I figured I could probably use twillio IFTTT etc Scenario is No Internet EZ-B is out of...
2
2 k
Nink |
question
Best High Torque 12Volt 100Rpm DC Motors To Use With EZ-Robot System
looking for best high torque 12volt around about 100rpm DC motors to use with EZ-robot system boards and software high torque is a must with speed of about 100rmp up to around 150rmp would suit my five inch (125mm) wheels any advice on connecting 4 dc motors and 20 LARGE SIZE servos would be very useful thanks all And all of you please keep up...
2
2 k
robo rad |
question
Micro Dc Motor With Position Control
Hello, I have searched and searched and searched trying to find a way to do this can someone please help me or provide a link with instructions on how to connect a micro geared dc motor with encoder and use it with either ezb4 or arduino with an hbridge. I have designed a prosthetic (several all previous just using servo motors) that I want to...
7
2 k
Al1953 |
question
Ez Script Not Working
Can't see any options under AutoPosition, I right clicked it and this small list apperaed the code says: There are no auto position actions. Maybe there isn't even an Auto...
4
2 k
Dave Schulpius |
question
Two's Complement
Hi, I need to do "two's complement" on numbers but can't seem to find any commands in the software that would let me do that in any easy way. Am I over looking a command?
2
2 k
Al1953 |
question
Proxy Server Issues With ARC Software
I am trying to connect to the ARC software but my school uses a proxy server to access the Internet. At this point in time our EZ robots are only...
5
2 k
DJ Sures |
question
Motor/ Servo Help
Hello All, I am currently using the EZB4 for my 54" biped robot. The robot weighs 13 pounds. And I need help picking out the correct type of motors. The EZ-B motors won’t cut it for...
11
3 k
Dave Schulpius |
question
Can't Save Any More Projects
My new install went well, I save one project I created, after that I can't save any other project - why?
4
2 k
EzAng |
question
Respeaker Raspberry Sound Location Question
I have been very interested in having my robot look in the direction of a person speaking. In the above picture you will find a far...
11
3 k
Ellis |
question
Libary Doesn Show Stl Rgb
i cant see the stl in robot designer from the rgb case. i was looking the stl rgb front and back.
1
2 k
Nomad 6R |
question
High Torque Servo DC 12-24V 380Kg.Cm
using High Torque Servo DC 12-24V 380kg.cm with the ez kit Best method
1
2 k
Dave Schulpius |
question
New Robot Need Help
I just received my new JD robot humanoid First I charged the battery second - I plugged the battery with the controller together, it come on saying welcome and go to the website -...
9
2 k
Nomad 6R |