Robot Building Questions
Take control of your robot's destiny by subscribing to Synthiam ARC Pro, and watch it evolve into a versatile and responsive machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
I Make Robots Crew Socks
Exclusive to robot builders, these are a one-size-fits-all solution up to a men's size 12. The construction is 73%...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Stream video from any URI/protocol (RTMP, RTSP, HTTP, UDP, etc.) to a selected ARC camera device for real-time network feed playback.
Featured
Upgraded Comic Expo robot hack powered by EZ-B IoTiny with v4 camera vision, LED animations, motor controller, HDD servos and LiPo battery.
question
STL Doesn't Match Print
i printed the backpart of a lever servo,and i notest the file is not correct with the print? i notest some other parts doesn match.
2
3 k
Nomad 6R |
question
Usb To Serial Connection Camera Option
With the option to use the EZB in serial to USB you lose the option for the camera since the connections use the camera port. Is it possible to...
49
11 k
fxrtst |
question
What Type Of Robot Hands Do Others Recommend
Finishing up a robot project but struggling with useful hands. I want to be able to pick items up at different angles, move them...
13
4 k
Nomad 6R |
question
Google Home And EZ-B
Hi guys, Is there a way to use/integrate google home with EZ-B/Synthiam? I have been locking for a tutorial but didnt find one. Regards.
5
2 k
Mickey666Maus |
question
Folger FT-6Https://Folgertec
Folger FT-6 https://folgertech.com/products/folger-tech-ft-6-3d-printer-kit I am interested in this printer kit, I have seen many using his smaller kits and have...
12
3 k
jstarne1 |
question
I2c Help
This document is outdated because ARC now converts the address for you. This document may be referenced for educational purposes. Binary i2c is not entirely about binary. But the address sure is! That is because most addresses are defined as 7 bit values. And if you keep reading, you'll see that changes need to be done to use that value in a byte;...
1
32 k
WRBT |
question
Playing A Sound
Hi, I'm trying to make a plugin that could play some specific sound on my Ez-Robot. I used the following tutorial : https://synthiam.com/Tutorial/How-To-Make-An-EZ-Builder-Plugin-16328/25 I'm stuck at the point where I compress the PCM Data with GZip : using...
1
2 k
aryus96 |
question
JD Camera Recording
Hello, I'm trying to record a video from JD's camera - I have tried to use : "_camera.StartCamera" and then "_camera.AVIStartRecording" but it doesn't seem to work.. I'm not sure if it is the right way and what videoCaptureDevice argument should be? Maybe someone have an example for recording a video? Thank you, Orit
0
2 k
Orit |
question
Ez-Arduino With L293
I used the L293 module connected to arduino, the ultrasonicsensor to make the rotbot automatically avoid obstructions, so when I turned the arduino into ez-b, I could connect it to L293, the ultrasonic sensor and do that project withez-cript similar to the code C++ II wrote and it doesn't seem to work?
2
2 k
joinny |
question
Human Sized Robot
is there any way to connect with someone experienced with building and remotely controlling a large robot for collaboration on a commercial project?
32
4 k
DJ Sures |
question
Speech Delay BT Speaker
Sorry for all the questions. I try to test and research before asking. I have a issue that's bothering me and can't seem to figure it out. I'm using a Alfawise X5 from gearbest and a BT speaker. Whenever I use any kinda speech trough the BT speaker. There is a slight delay and the 1st word is not spoken. Iv'e tried setting the speaker as the...
1
2 k
DJ Sures |
question
Powering Mini PC
Looking for suggestions on powering on mini PC on a battery. Trying to keep it light weight. Would a 12V lead acid battery with a buck converter work? PC is 12V 1.5a draw
2
2 k
Xuven |