Robot Building Questions
Stay at the forefront of robot programming innovation with ARC Pro, ensuring your robot is always equipped with the latest advancements.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Control Robotis Dynamixel XL-320/AX-12/XL430 via ARC virtual servos; supports position, speed, velocity, acceleration, bidirectional UART.
Featured
Ultimate 20-inch 2/3-scale Wall-E - $250. Cleaned, 80% of actions via onboard buttons or voice commands; no remote included.
question
Use Webcam With Ez-B V4
I'm intending to use this conversion circuit to integratethe camera with ez_b, hopefully everyone can give me an advice before I buy it. USB UART switch CP2102 uses CP2102...
3
2 k
ptp |
question
Hitec D845WP Servos Can't Move Slow And Smooth
I'm testing a new robot , using ezbv4 and hitec D845WP servos with lipo 7,4 V batteries. (I never used these servos and such high-current batteries before). These servos are very quick, expecially with lipo batteries. So, when I program an action, I can't get a smooth and and slow movement, no matter how I set delay, step and speed in the action...
9
4 k
Dave Schulpius |
question
Strange Issue With Servo Speed/Delay/Steps And Usb Camera
Hi everyone, I have been following you for some time and first of all I wanted to thank this forum and the...
14
3 k
DJ Sures |
question
Getvoltage - Object Reference Not Set
Can anyone tell me why GetVoltage() in a script gives me the error "Object reference not set to an instance of an object" ? Regards BAW
2
2 k
baw |
question
Inmoov Kinect Function
Hi, I'm diving into InMoov and have thus far just been printing parts with abandon while I finish researching everything else. I have totally decided to go with EZ-Robot rather than MRL for obvious reasons, but I have found conflicting information about whether I can use the Kinect with EZR. Beyond whether I can use it or not, I'm a little...
2
3 k
Perry_S |
question
Rc Lawnmower
These Rc lawnmowers caught my attention, So i purchased a spectrum DXE remote controler with reciever, also purchased a 2x32 sabertooth drive. I have a key start mower, just don’t know what othe components i need to start my mower from the controller any help please?
8
2 k
DJ Sures |
question
2 Single Motor Controllers
Just wondering if any one has run 2 single motor controllers instead of a dual channel H-bridge on their tank style robot and will it be hard to get both controllers to...
10
3 k
robo rad |
question
How To Wire A Button?
I believe I know how to do this but I want to confirm. Using an adc port, I would connect the positive to the in on the button and the ground to the signal/receive? yes or no?
17
5 k
Dave Schulpius |
question
Error Dowload ARC
I encountered an error downloading ARC: ARC could not be installed on the following windows versions: windows server 2003 * 86 service pack 2, windows xp * 86 service pack3, setting up...
2
2 k
joinny |
question
Dynamixel With Ezbpi Server
I am trying to control my Dynamixel AX-12a with the EZBPi, but when I try to connect ARC it disconnects shortly after... Is there a wiring schematic or a tutorial on...
20
6 k
ptp |
question
Reverting Servo In Script Or Movement Panel
Probably but silly question but I can’t figure it out, does any one know how to revert a servo in either script or the movement panel?...
16
3 k
Robotist_in_tr… |
question
Omnibot 2000 Arms
Anyone successfuly hack the arms on one of these to work with servos?
1
2 k
Jeremie |