Asked
— Edited
Resolved by Jeremie!
3D Print Jd Head
hi
has anyone printed a jd head?my question is ,how do you print the head on the printbed?
thank you
Related Hardware (view all EZB hardware)
JD Humanoid
by EZ-Robot
JD humanoid robot kit - WiFi-enabled, 16 DOF with metal-gear servos; easy, fun, educational, available from the EZ-Robot online store.
Wi-Fi / USB
Servos
24
Camera
Audio
UART
3
I2C
ADC
8
Digital
24
Related Robot Skill (view all robot skills)
File Manager
by Synthiam
Displays files currently open for reading by scripts, shows only read-opened files, helps diagnose read/write locks and file access errors.
Nice Nomad, follows the hand moves
hi ezang
the IR sensors on the choulders do .xD
thanks
dj&team
great idea the swag store . like it .
playing a little with the meccanoid robot .
look good, what is that green light? an LED?
hi ezang
yes a flat LED . connected on the signal .black/white on ezbv4 . whit the talk servo .
hi
i made a servo block that fits in the arm of a meccanoid robot . now you can turn your hand or gripper .
the little plate in front is to line up the block with the arm . above you can ad some little screws in from original HDD servo's screws in bolt side .
you can ad real hands also . you can order them now assembled and with the wire and end bracket included .
robot hands .
hi
in the above video i used a MG995 servo witsh has a range from 7 to 173 degree . the HDD from ez robot has 1 to 180 full range . huge diff .
new finiched servo block for meccanoid wrist .