Asked
— Edited
Resolved by Jeremie!
3D Print Jd Head
hi
has anyone printed a jd head?my question is ,how do you print the head on the printbed?
thank you
Related Hardware (view all EZB hardware)
JD Humanoid
by EZ-Robot
JD humanoid robot kit - WiFi-enabled, 16 DOF with metal-gear servos; easy, fun, educational, available from the EZ-Robot online store.
Wi-Fi / USB
Servos
24
Camera
Audio
UART
3
I2C
ADC
8
Digital
24
Related Robot Skill (view all robot skills)
File Manager
by Synthiam
Displays files currently open for reading by scripts, shows only read-opened files, helps diagnose read/write locks and file access errors.
I think that red part is on backwards
perry S
oh i missed that one . you are correct .but now i have space for the iotiny . maybe i need to double it .
hi perry S
i have a question . i have posted it on inmoov site but get always an error message ( you use an inapropiate word )?
am lookin for a foto's ,video how the stand is mounted on the waist . and what is this slot for in the picture ?
I'm not sure what that slot is for and I can't remember from assembling my first inmoov.
perry S
ah ok . i will look further then .
thanks
little update
i modified the low waist stand .you can use now a bolt and nut . nut is with locker 4 mm ,the bolt is 4.27 long 4 mm. and pre hole for attach on the pole . also extra support for extra screw or bolt&nut 4 mm .
Those are good mods Nomad.
hi perry S
thanks .there some parts that can be a little better . the above part .one screw hole is to close to the side . thats why i connected the two rails .now you can ad a screw more to support that hole.