Asked
— Edited
Resolved by Jeremie!
3D Print Jd Head
hi
has anyone printed a jd head?my question is ,how do you print the head on the printbed?
thank you
Related Hardware (view all EZB hardware)
JD Humanoid
by EZ-Robot
JD humanoid robot kit - WiFi-enabled, 16 DOF with metal-gear servos; easy, fun, educational, available from the EZ-Robot online store.
Wi-Fi / USB
Servos
24
Camera
Audio
UART
3
I2C
ADC
8
Digital
24
Related Robot Skill (view all robot skills)
File Manager
by Synthiam
Displays files currently open for reading by scripts, shows only read-opened files, helps diagnose read/write locks and file access errors.
i made a lid to cover up your ezbv4 or to protect against dust or any.
post #288 you can use the ez robot charger to charge the big batterie.
what do you do when your brakets are too long? you can make a block cover.
and slide that over the bracket.
and hold it in place with a screw.
waiting for parts ,duh. i will call him lewanbot
Aaaaaawwwww ZOE has another brother!! The family keeps growing!! I really like the thought, that ZOE is no longer alone...
hey mickey
its good to have a big famely.xD says lewan .
i started printing the inmoove head.and have a few questions.
what kind off servo's are used in the picture ? and second ,how is the horn calibrated ? calibrated when horn is up or down?. i modified the gear so you can screw a horn on it.
anyone thank youNomad,
Have a look at the Inmoov Website, all the information is on there.
https://inmoov.fr/build-yours/
hi cem
ok i have it.thanks
Nomad You might want to have a look at the inmoov quiet Jaw, I changed my inmoov to this as it makes less noise it is easier to setup and the big advantage is the mouth closes fully when inmoov quits talking. the old jaw design made the mouth difficult to shut the mouth fully and I did not like the look. the quiet jaw is on thingiverse https://www.thingiverse.com/thing:2787185