Live Stream Broadcast icon Live Stream Broadcast — Broadcast live audio and video from ARC camera to the web via HLS; cross-browser streaming. Requires router configuration for external access. Try it →
Robot Showcase

Easy Led Visual Test For Digital Ports Tutorial J Starnes

8,049 views 23 comments 4 photos 1 video

About this robot

During my last setup with a h bridge I was frustrated and wish I could see if the ports were active at the time they were triggered but I don't have enough hands to hold a meter , not short something out and still toggle ports to troubleshoot my setup. So I wanted to share this idea. All you need is a servo connector or jumper cables. Cut off the red wire. Connect a left long lead ( pos) to the white and short lead to ground Ta DA! Easy

User-inserted image

By — Last update

More robots by jstarne1

Other projects from the same builder.

Discover more robots

Robots the community built with Synthiam ARC. Get ideas for your next build.


ARC Pro

Upgrade to ARC Pro

Elevate your robot's capabilities to the next level with Synthiam ARC Pro, unlocking a world of possibilities in robot programming.

#3  

Thank you Josh! for your generosity . The LEDS use very little power for testing UNLIKE servos, like I am using. :)

#4  

Wednesday, 20 March 2013

Good Morning Jeff Starnes, aka jStarn1 !

 Your LED-Jumpers idea is GREAT ! What limits the LED Current to 5 or 10 Milliamps ?

Also, Your long list of projects is MOST Impressive !

If You would like a FREE Roomba to Hack, please call me ?

I would enjoy Chatting with you about EZ-B's !

Thank You & Best Wishes From Phoenix,

[email protected], 602-246-1246(H)

P.S. I am still trying to purchase a Full Set of OSMO's, Both 400 & 500 Series for our local Washington High School Robotics Club ?

#6  

Great idea Josh. Seeing the light come on is nice and makes it easy to troubleshoot. I should make me up a rig like that. What I usually do not all to free up my hand is too cut the female end off of a servo extension. Then I use an alligator clip jumpers to attach my meter. That is nice because I can see exactly what voltage I am getting. Sometimes it's important to know how much voltage you have and if it is positive or negative.

By the way did you ever get your H Bridge working?

#7  

A few H-BRIDGES comes with leds on board, 2 leds per channel MOSTLY L298 types But still a good idea JOSH ,i havemade test lights like that to check my arduino and basic stamp boards

#8  

Also anyone needs some leds i have more then 100 of them and free