EZB Stress Test icon EZB Stress Test — Stress-tests EZ-B controllers (UART, ADC, voltage, temp, audio, digital I/O) to detect disconnects, corruption and stability issues. Try it →
Robot Showcase

Mini Version Boxbot P2-V1

3,178 views 33 comments 2 likes 18 photos 2 videos

About this robot

P2 stands for printed second version boxbot.cause dj made the first boxbot. the V1 stands for version 1.version V2 will get some wheels. this robot is a desk robot to train excample camera /position movements and more. it has 4 micro servo's camera still to come ,two flat eye LED blue. the red covers lowerlegs are changeble i, other colors. still need to do .head to print/camera /choulder covers (servo's )

By — Last update

More robots by Nomad 6R

Other projects from the same builder.

Discover more robots

Robots the community built with Synthiam ARC. Get ideas for your next build.


ARC Pro

Upgrade to ARC Pro

Stay at the forefront of robot programming innovation with ARC Pro, ensuring your robot is always equipped with the latest advancements.

Author Avatar
PRO
USA
#1  

Nomad, looking good, 

all your plans above look good, will wait to see them, send more pics when finished.

I have not had a chance to figure out and use my 3d printer   :-(

I am at the farm again - no robot stuff out here, only hard physical work  :-(

Hope to be back in city life soon.

be well

EzAng

Author Avatar
PRO
Belgium
Thingiverse
#2  

hi ezang

i hope you get your printer going soon.

thanks

#3  

Nomad, thats looking great. Well done with the 3D printed body. Im just starting to get back into printing with my new printer.  Cant wait to see whats next:)

Author Avatar
PRO
Belgium
Thingiverse
#5  

thanks guys.next will be some wheels.:D

Author Avatar
PRO
Belgium
Thingiverse
#6  

here are some pics how to ad the horn on the arm. also i made a hole in front neck servo to let the wire into chest.

User-inserted image

User-inserted image

User-inserted image

Author Avatar
PRO
Belgium
Thingiverse
#7  

the eye disc go's half in the holes of the head.the LED has a flat head 3.3 volt (for pwm ).

head is reddy for printing.it has room for camera/two eye LED and mouth LED /speaker.

User-inserted image

User-inserted image

User-inserted image

the micro servo in head needs to be mounted side ways. backpack plate for iotiny can be screwed on the chest. i used spacers for now.you can use screws or glue the iotiny in place. make sure to use tiny screws,cause off the wirering inside the chest.

User-inserted image

User-inserted image

User-inserted image

Author Avatar
PRO
USA
#8  

Nomad, are you using ABS, or what?

EzAng