All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms by X,Y,Z(cm); computes joint angles (inverse kinematics), shows forward...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Legacy iRobot Discovery and 4xxx control via EZB software-serial (D0), supports Arduino/EZ-Robot, adjustable baud rate; not for hardware UART/USB
-636504920452491494.jpg)
Featured
Build a Wall-E robot with EZ-Robot IoTiny and EZ-B v4 camera using Synthiam ARC for easy setup, tutorials, and affordable ~$200, 16-hour build.
General
EZB Connect By Name v2
Discover EZB WiFi controllers by name, auto-bind connections, avoid IP management; live discovery and multi-EZB support for ARC.
3
35 k
question
When Is The Next Update Of ARC Exspected To Be Released?
When is the next update of ARC exspected to be released?
1
677
Synthiam Suppo… |
question
Can't Find The Remote UI Tab Within My Robot Properties Page
I want to create a remote control via Remote UI app. I followed the instructions but there is no page to enable the remote UI server within the my robot properties as shown in the instructions. What do I miss?
6
784
martin.ryschka |
question
Moving ARC And Robot To New Wifi Network.
I'm moving a robot with 3 EZB's controlled through ARC on a laptop to a completely different WIFI network. I had everything running...
37
3 k
Dave Schulpius |
question
Error In Connection
Version: 2022.02.22.00 System.Exception: Capability 'Hardware UART TX/RX with DMA buffer and adjustable baud rate' is not supported on this EZB device. at EZ_B.Firmware.FirmwareCls.CapabilityRequired(CapabilityCls cap) at EZ_B.Uart.ekkk6bh47sl3YnIGsBG(Object , Object ) at EZ_B.Uart.UARTExpansionInit(Int32 port, UInt32 baudRate) at...
1
797
inthedarkshade… |
question
Dynamixel Xl430-250T Via Arduino Uno And Dynamixel Shield
how do I connect the arc sythonium via dynamixel shield and arduino uno for dynamixel xl430-250t?
0
2 k
inthedarkshade… |
general
The Desire For Attribution
I need a sounding board. It's AI and robot-related in the sense that it affects the members of the community that generate content, offer support, and share ideas. Here are my questions to the community: 1. In general, ideas being taken or appropriated is quite normal. There's also the case where good ideas also seem to rise to the surface in...
16
2 k
DJ Sures |
general
Starting To Use Ez-Robot Head
how do start using ez-robot head design, like controling servos?
21
3 k
Nomad 6R |
question
Custom Robot Using EZ Bv4, L298n Motor Driver And Motors
please could you show me how to create a JD style robot with moving head and arms, but with wheels instead of legs. I am using the EZ Bv4 and a l298n motor driver. For the arms, gripper and head I am using HDD servos attached to to EZ Bv4. Also include the settings and interfaces I need in ARC along with any code?
2
559
Synthiam Suppo… |
general
Random Servo Movement Wanted As A Demo
Hi all. Is there anyway of having a servo randomly do stuff? Almost like a demo situation? So the robot just sits there and moves his head, or...
11
909
djjon1976 |
question
How Do I Make A Robot With Wheels?
Can you help me create a JD style robot but with wheels instead of legs? I will use an l298n motor controller and the EZ Bv4 to connect ther servos for the arms and the l298n board.
2
630
Synthiam Suppo… |
question
Import JD Skills
Where in the ARC programdo I i mport skills for JD robot?
2
491
Athena |