All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
ARC UI for onboard computers to control NeoPixel rings via serial: test/run patterns, preview and copy Arduino serial commands, includes sample code.
Featured
Control Philo Junior with Synthiam ARC camera 'Track By Relative Position' and WiiMote for simple, cost-effective, user-friendly robot control.
question
Dynamixel Plugin Help
DJ, The updated Dynamixel Plugin is great! This is not a bug report but a request for an additional capability: 'Adjust AX-12 endpoints'. I have struggled (off and on) for over a year to get a biped robot fully operational using AX-12 servos driven from an EZ-B. I think that with an 'end point conversion' addition to the plugin my goal can be...
2
3 k
OldBotBuilder |
question
Pc Stick
Hey, has anyone tried out a PC Stick to run the EZB. I think it would open a whole new world as they become more powerful. I am thinking of using one on my second robot Sam. Sam is a Roomba platform.
16
5 k
faengelm |
question
Bing Speech Plugin
Hello I began to test the plugin Very catastrophic results in french Is there an option for language Thanks for help
9
3 k
DJ Sures |
blog
The Day The Onion Used EZ-Robot In A Satire Article
Small robotic modification could eliminate 30% of the U.S. workforce-provocative, opposite EZ-Robot's approach yet...
0
682
question
Robosapien V1 Remote Question
Hello. I have recently bought robot and remote (separately). Robot seems to work fine (when I click on the button it says something and moves arms and legs for 10-15 seconds). The remote has a problem. Green light is never on. I have tried several batteries, all brand new - the result is the same. When I press the buttons in the center of the...
2
4 k
robo rad |
question
Using Ezb Hbridge To Control Rc Truck
I am looking to control a basic RC Truck using an HBridge from EZ-Robot. The RC truck is quite simple in that it has one motor for forward and...
32
7 k
rbonari |
question
Ez Robot Smart Servos?
@DJ There have been lots of discussion (especially lately) about Dynamixel smart servos and now you have released a new plugin for support of KRS ICS smart servos too... I was...
40
8 k
Ellis |
robot
Cfernandez's Extended Camera Cable
Find options for extended camera cables (twice the length) and how to showcase your finished robot on the site
8
4 k
Ellis |
question
Dj's Autominous Omnibot
Anybody tell me where to find code etc for DJ's Omnibot. Checked out his great videos and plan to convert one.
1
2 k
CardboardHacke… |
question
Ultrasonic Sensor Reads 255 Constantly
I've been trying to use an ultrasonic sensor to use on my JD robot but the output is constantly 255 regardless if there is something in front of...
3
2 k
jake12345andwd |
question
Lessons
Hello all! First let me say I find this to be a great product and it's apparent EZ has worked hard to make this as easy as possible. Thanks for your great work and all who contribute! That being said it's also apparent I am just not smart enough to finish the setup process with the lessons/tutorials that are available. I have built a JD with hips...
3
2 k
Novo |
question
Speed For Camera Servo- Tracking
Another question. When trying to get the most out of the camera tracker, I've always struggled with how its moving the servos if i choose grid option. 1) The servo speed seems set to (slow?) on increment 1 2) If I change the incremental steps I can make the servo speed faster at the cost of what seems larger degrees of movement?! 3) I'm trying to...
4
3 k
fxrtst |