All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Displays trained object names as overlays on the Camera Device video stream using Camera Device's object-tracking (shows $CameraObjectName).
Featured
Localize an EZ-Robot AdventureBot with Intel RealSense T265 and Synthiam ARC NMS, waypoint navigation, SLAM prep, lidar mapping and pathfinding.
question
Parameter Is Not Valid
This is something that pops up ocasionaly. I just started ARC. Created a new project. added a new control "debug" when this popped up. I am not requesting assistance because in the past it continues to work. I am hopping this information may be of interest to you.. uninteresting screen shot https://1drv.ms/i/s!AsWMBmr_eX0eqQoCnHWAQJY-GJdA...
3
5 k
DJ Sures |
release
Release 2017.03.06.00
Synthiam ARC: GDI GC, UI/form lock-up fixes, speech pause event, HAAR rename, plugin logs, servo profile options, Blockly audio commands.
0
4 k
question
Programming Revolution Six Wifi Hexapod
Hi, My question is about EZ-Robot Revolution Six WiFi Hexapod I want to create a demonstration program that will show a robot navigate a maze Robot should be controlled via http interface and execute very simple commands such as walk forward, stop, turn 90 degrees Detecting when it hits a barrier would be a bonus Can above mentioned robot do this...
4
2 k
ybesidski |
question
Jd Humanoid Robot
I am starting a project for a high school class. I am hoping to build the JD Humanoid Robot. I have already 3D printed off most of the parts, however we are hoping to make our own...
5
2 k
Dunning-Kruger |
question
Revisiting Power Supplies
Hey guys, I'm trying to use a single power supply AC to DC 12 volt 20 amps and I want some kinda step down converter to 7.4 volts. To be clear I have half a project running at 12v and the other half at 7.4 volts. I'd rather not have two power supplies if i can help it. Any suggestions on best way to step down? Also do the amps stay the same if you...
3
3 k
fxrtst |
question
Robo Scratch Android
Hello, I tried using Robo Scratch for Android Mobiles today to program a loop. Is this possible at all? So I would like to start the scratch again and again. Thank you
13
4 k
lizpoir |
question
External Power
Hello everyone, how are you? I know there are several topics around relating to modifying the EZ-Board for use with an external power supply. I just need to check to confirm that I understand...
16
4 k
Dunning-Kruger |
question
Rad Robot
Happy to report that my EZ b and H bridge motor controller came in and is working. I have already figured out much of how to get the old Rad robot base tank to work ...and with audio,Doing the audio...
13
5 k
robo rad |
question
Monocular Camera Slam
Does anyone know how to or know of anyone who has used the EZ-B v4 camera on a robot to do monocular SLAM similar to the videos below. It seems that all the code is available...
0
3 k
sjeannet |
question
Charging Revolution Jd
It would be great if you lengthened the connection of JD to the charger. We have some connections that are so tight it has been very difficult to charge. stress
2
2 k
thetechguru |
question
Sabertooth 2X25
I have my RC lawnmower working great right now. I bought an ezb so that I could use it from the couch via wifi. Looks like the ez connects to the sabertooth via gnd, +5 and S1. Which pins on the ezb do I use for that? ACD or Digital? It looks like the ezb will be powered via the sabertooth, will not need batteries for it?
3
3 k
dassey |
question
Servos Don't Work
I just received the JD Robot from you last week. It seems to have a couple defective servos. The first one a main shoulder servo that is in the humanoid body. The second defective one is...
5
2 k
bluebbe123 |