All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Use camera-detected printed cue cards (direction, pause, start) to record and run stored movement sequences for ARC robots.
Featured
Build Wall-E: arms and tracks assembled, head servo ready; camera hack, LED mod and head-tilt mounting ideas for EZ-B hookup.
question
ARC, How Firm Is That Requirement Of 2Gb For Runtime, Not Producing Code?
I see the requirements for ARC on the page: Minimum Operating System Requirements Windows 7 minimum Intel Pentium or AMD 64 or 32 Bit 1 GHz CPU 2 GB RAM 50 MB Drive space I have an old UPMC (the precursor to a tablet), that I should be able to upgrade to Windows 7, however, it has a fixed, nonupgradeable amount of RAM, at 512mb of RAM. Is there any...
9
3 k
Dave Schulpius |
question
Sabertooth 2X32
Hello, I have got a Sabertooth 2x32 Controllers and am thinking of wiring it up to my wheelchair and to my RC receiver but I am not quite sure how I would go about it as I would like to...
0
2 k
davidm123 |
question
ARC On Unplugged Mode
I can use the robot JD only at school and for this I want to prepare at home the code with ARC first and then use it with JD at school. I installed the SW on PC and on Tablet. I was wondering: Is it possible to use ARC in unplugged mode? Thank you Claudio
4
2 k
Jeremie |
question
Jd Set Up/Connection
So I feel like I am missing something and that the issue is quite simple however I have yet to correct it. I've been following the online tutorials step by step. I cannot get past...
5
2 k
mcriscitello |
question
Mp1584en Dc-Dc Buck Converter
Hi, I am working on Roomba and InMoov projects. I needed something to step down power from 12VDC for sensors on InMoov and Step down power from Roomba to EZ B....
4
5 k
jphillipsnj |
robot
Robot56's Astromech Droid
Build a full-size astromech droid from styrene and 3D-printed parts; dome uses a security mirror with a 2" floral-ring riser and styrene cover
174
35 k
gianninucci |
question
Is This Iotiny Used?
Question for those of you that have bought an IOTiny recently. I ordered mine and it arrived very quickly to the US. Shipping cost was high but delivery time was great Thing is...
6
2 k
Perry_S |
question
Proxy Authentication Required (407)
Hi, I work at a school and we use a proxy server. I am not able to successfully authenticate to EZ-Cloud. Here is the error that I am receiving: Error: The remote server returned an error (407) proxy authentication required. I receive this error after I try to login to EZ-Cloud Account Settings email address & password. I have looked through...
1
2 k
DJ Sures |
release
Release 2018.03.06.00
Global exception handling and camera-first load priority for better diagnostics, plus a new Sentiment Detection control.
7
4 k
robo rad |
question
Question On Size Of Target Window Camera Control
Is it possible to change the size of the capture red box (80x80)? If i change the size from 320 to 640 camera resolution,...
3
2 k
fxrtst |
robot
Stiko's My Ezri From Bavaria
Robot first steps, build guidance, common errors and fixes to streamline setup and improve reliability
19
6 k
DJ Sures |
robot
Toymaker's The Altair Robot Chronicles
ALTAIR EZ:1 robot showcases pouring and serving a drink in Part 1 of a series demonstrating its current capabilities
53
13 k
DJ Sures |