All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Overlay image packs onto camera feed and map images to control-variable ranges with auto/manual assignment, position and sizing options.
Featured
R2D2 integrated with Kinect using EZ-B showcased at Campus Party Quito-easy robot building with EZ-B, demos and community support.
question
Anki Drive
Just discovered this company. I work as a volunteer with Anki Drive. The potential of the two nodes, this and AnkiDrive seems fantastic. The SDK for 'drive is on the AnkiDrive site. Check it out and...
24
4 k
Nomad 6R |
live hack
Botmatrix Live Hack Session 9
Build a budget laundry-folding robot using a folding board, HDD servos, camera and IoTiny with object and voice recognition for custom folds
10
3 k
Jeremie |
live hack
PWM Servo Position Feedback (Read Servo Position)
Hack PWM servos for real-time positional feedback in EZ-Builder using EZ-B v4, Arduino or IoTiny with ADC/I2C Synthiam ARC...
11
6 k
Mickey666Maus |
question
This Device Is Not An Ez-B Reports 69
I'm hoping someone can help. I have searched and found this topic mentioned several times and I have tried the solutions offered but still no...
25
4 k
Bazza59 |
question
Battery Not Charging
Hello, I keep getting the battery is low message and when I try to charge it, it takes about 20 seconds to charge and I get a green light on the charger saying its ready. As I Turn it back on it starts with the "my battery is low again. I should also mention that the ez robot is right out of the box brand new. Double checked the Battery Care...
15
3 k
DJ Sures |
live hack
Make Your Own Giant 3D Printer Build Vol 1
Live stream setup at 7 to assemble camera mounts and arms; Volume 1 of a multi-part build, may span 3-4 sessions.
13
3 k
jstarne1 |
question
How To Create More Glyphs
Is the a glyph encoder? Question - how to create more glyphs? thanks
2
3 k
EzAng |
question
Best Method For Driving Meccano Wheels & Motors
Need more information on how to connect the Meccano (g15ks model) original wheels & motors to a EZ-B v4? Consider hardware, cost, ease of installation and compatibility with ARC . Thank you for your help, Cesar P.S. I have update the servos with HDD EZB servos, & reconfigured the head & neck servos. I will be adding a EZB...
1
3 k
DJ Sures |
question
12C Communication B\W Arduino And Ez-B V4 Wifi Controller
ez-b v4 has 3 i2c connectors so can I connect scl and sda pin of Arduino to i2c connectors of ez-b v4 controller to establish communication b/w Arduino and ez- b v4 which will help in my inmoov project??
1
2 k
DJ Sures |
robot
Nomad's Robo Cat Angelica
Robo Cat Part 2 mini build to reveal hidden flaws; body and head assembled so far, planned scale-up to support a micro HDD
5
3 k
Nomad 6R |
question
Wheel Not Working Properly
Hi there, I have an AdventureBot where the wheel only turns in one direction. I have tried the following: - swapped out motor - switched pin input Any ideas on next steps? Any advice would be great - supposed to be taking it to a show in two days...
2
2 k
adhartwell |
robot
DJ's JD Humanoid Puppet
Sync two JD robots' servos in real time with a Synthiam ARC script using PWM Servo Feedback to mirror positions over network.
0
4 k
DJ Sures |