All Community Content

Servo Jumping On Initialisation

The dreaded jumping servo problem has arisen again - just today. All servos in the robot are HDD. The servo on port D0 now jumps after connecting, to about 35 degrees instead of 90 degrees. If I move the servo manually when turned off, the centre position is still 90 degrees, so the sprocket has not shifted. My INIT script has not changed. That...

Controlling Servos For Robotic Arm

Hello, I purchased this robotic arm (https://www.dfrobot.com/product-192.html#:~:text=DFLG6DOF%20is%20a%20bionic%20robotic,be%20rotated%20about%20180%20degrees) and wanted to control it via ARC. Should the servos be compatible? I also think it could have something to do my power adapter. I am using a 9V DC 800 mA adapter.

Ezb 4 Keeps Disconnecting

Here is the error message. Comm Err: System.IO.IOException: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. ---> System.Net.Sockets.SocketException: A...

Any Way To Have 8 X 8 RGB Blink When There Is Audio?

Hello Everyone, my first time here, I just started into robotics. I am looking to have the 8 X 8 RGB blink when my robot talks. I have tried scripts I found in the community on here, but since it doesn't connect to a digital port they do not work. I tried editing some of the scripts to use a sound servo to enable RGB animator script, but it still...